Black Box LC-XE10 Computer Adjustment Auto, Auto PC Adj, To store adjustment data

Computer Input

Computer Adjustment (Auto)

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.

1	Press the MENU button and the On-Screen Menu will appear. PC Adjust Menu
	Press the Point Left/Right button to move the red frame pointer
	to the PC Adjust Menu icon.
2	Press the Point Down button to move the red frame pointer to
	the Auto PC Adj. icon and then press the SELECT button twice.

This Auto PC Adjust can also be executed by pressing the AUTO

PC button on the top control or on the remote control.

Auto PC Adj.

Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for the input signal from your computer.

To store adjustment data

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in the PC System Menu (p26). See “Store” on page 29.

NOTE

●The PC Adjust Menu cannot be operated when the input signal is digital, a signal compatible with HDCP, or a memory card is installed into Multi Card Director.

●The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu.

PC Adjust Menu icon

Move the red frame pointer to the Auto PC Adj. icon and press the SELECT button.

27