Black Box LC-XE10 instruction manual Video Input, Input Source Selection RGB Scart 21-Pin

Video Input

Input Source Selection (RGB Scart 21-Pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Computer 1

Computer 2 ✽

Video

COMPUTER 2 button

Computer 2 ✽

✽Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is used as Monitor out.

See “Terminal” item on page 40.

Menu Operation

1	Press the MENU button and the On-Screen Menu will appear.
	Press the Point Left/Right button to move the red frame pointer
	to the Input Menu icon.
2	Press the Point Down button to move the red arrow pointer to
	Computer 2 (Only the Computer 1 is displayed when Monitor
	out is selected in the Setting Menu.), and then press the
	SELECT button. The Source Select Menu will appear.
3	Move the pointer to the correct input source and then press the
	SELECT button.
		When the input source is coming from video
RGB (Scart)
		equipment connected to the COMPUTER IN
		2/MONITOR OUT terminal with a Scart-VGA Cable,
		select RGB (Scart).

Input Menu

Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB (Scart) and press the SELECT but- ton.

NOTE

●Scart-VGA Cable is optionally supplied. See page 55 for order.

34