BenQ MP721C user manual Setting menu

Page 46

Setting menu

FUNCTION

(default setting DESCRIPTION / value)

 

Toggles projector audio and Power On/Off Tone between on and off.

Mute (off)

To disable Power On/Off Tone, go to

Setting > Mute and press

 

Left3/Right 4. Then press Down 6 to choose Power On/Off Tone and

 

press Left3/Right 4 to select off.

 

 

 

 

Volume (5)

Adjusts audio volume level.

 

 

 

 

 

OSD Time

Sets the length of time the OSD will remain active after your last button

press. The range is from 5 to 100 seconds.

 

(20)

 

 

 

 

 

Blank Time

Sets the image blank time when the Blank feature is activated, once

elapsed the image will return to the screen.

 

(20)

 

 

 

 

 

Quick

Enables or disables the Quick Cooling function. Selecting On enables the

function and projector cooling time will be shortened from a normal 90-

Cooling (on)

second duration to approximately 30 seconds.

 

 

 

Panel Key

Disables or enables all panel key functions except POWER on the

projector and buttons on the remote control.

 

Lock (off)

 

 

 

 

 

 

This is a selectable function. Selecting On limits use of the projector to

 

only those who know the correct password. When the function is activated

 

for the first time, you have to set a password for it. For more information,

 

refer to "Utilizing the password function" on page 26. Once the password

 

is set and this function is selected, the projector is password-protected.

 

Users who do not know the correct password can not use the projector.

Password

WARNING: You will be inconvenienced if you activate the password

(off)

functionality and subsequently forget the password.

 

Print out this manual (if necessary) and write the password you used

 

in this manual, and keep the manual in a safe place for later recall.

 

The password can be entered by using either the buttons on the projector

 

or the remote control.

 

 

The digits being input will display as asterisks on-screen.

 

 

Change

You will be asked to enter the current password before changing to a new

one. For more information, refer to "Utilizing the password function" on

Password

page 26.

 

 

 

 

 

Returns all settings to the factory preset values.

 

Reset (No)

The following settings will still remain: Mirror, Language, Password,

 

 

High Altitude Mode, Phase and H Position.

 

42 Operation

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Welcome Copyright DisclaimerTable of contents Iv Table of contents Future reference Projector lamp is on Important safety instructionsRefer servicing to qualified service personnel Do not look straight at the projectorSafety Instructions Bedding or any other soft surface 10000 Feet Important safety instructionsAllow at least 50 cm clearance from walls Safety Instructions Introduction Projector featuresIntroduction Shipping contents Rear side Projector exterior viewFront/upper side Lower/side viewProjector Controls and functionsTurns the projector on or off Exit Remote controlAdjusts the focus of the projected image FreezeEnters presentation timer setting directly 3Left, Right4Pull out the battery holder Remote control effective rangeReplacing the remote control battery Push the holder into the remote controlPositioning your projector Choosing a locationSafety instructions for ceiling mounting of the projector Obtaining a preferred projected image size Positioning your projector 1219 Maximum zoom Minimum zoomScreen Center of lens Projection distance 1500Projector with the wireless module Wireless connection optionalConnecting a computer or monitor ConnectionVGA to CableConnecting a monitor Best video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a Component Video source device DVI cables Connecting an S-Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device Start up OperationOperation Setting a password Utilizing the password functionLeft 3 or Right4 Entering the password recall procedure If you forget the passwordChanging the password Adjusting the projected image Switching input signalAdjusting the projection angle Fine-tuning the image size and clarity Auto-adjusting the imageCorrecting keystone Selecting the aspect ratio For exampleSelecting a picture mode PC Signal InputCreating your own startup screen MyScreen function Hiding the imageYou can set the blank time Ii.Click Next Iii. Click Next To execute MyScreen utilityIcon Click MyScreen to begin downloadVi. Click Close when the window below displays Activating panel key lockSetting the presentation timer Freezing the imageShutting down the projector Utilizing FAQ functionDisconnect the power cord from the wall socket Press and hold BLANK/Q? on the projector for 3 secondsMenu operation Menu systemUsing the menus Picture menu Tint ColorSharpness Pro-Picture menu Setting menu Advanced menu High Altitude Mode offTimer Auto OffEquivalent ResolutionInformation menu Lamp Hour SystemMaintenance Care of the projectorCalculation of lamp hour Install a new lamp for optimal performanceLamp information New lamp should be fitted to avoidReplacing the lamp Remove the lamp cover from the projector Locators on the projector MaintenanceRemove the lamp cords from the slots Tighten the screw that secures the lamp Temperature informationResetting the lamp counter Restart the projectorPowering up IndicatorsStand-by mode IllustrationLight Status & Description Power Temp Lamp Thermal events Make sure that it is switched on TroubleshootingPlug the power cord into the AC inlet on You do not remember the passwordSpecifications Projector specificationsSupported timing for Component-YPbPrinput Timing chartSupported timing for PC input Supported timing for Video and S-Video inputsDimensions Mm W x 94 mm H x 219.5 mm D 278 64.3 Unit mm SpecificationsWarranty Limited warrantyEEC statement Regulation statementsFCC statement MIC statement
Related manuals
Manual 1 pages 55.09 Kb

MP721C specifications

The BenQ MP721C is a versatile and reliable multimedia projector designed to meet the needs of various presentation environments, making it an ideal choice for both educational and business settings. With a bright output and an array of features, the MP721C enhances the viewing experience, ensuring that every detail is clear and impactful.

One of the standout features of the BenQ MP721C is its impressive brightness level, measuring at 2400 ANSI lumens. This high lumen output means that the projector can be used effectively in well-lit rooms without sacrificing image quality. The resolution of 1024 x 768 (XGA) allows for crisp and clear images, making it suitable for displaying detailed presentations, videos, and graphics.

The MP721C employs DLP technology, known for its reliability and consistent performance. This technology also contributes to the projector's ability to produce rich colors and deep blacks, enhancing the overall visual experience. Furthermore, the BenQ MP721C includes a built-in speaker that offers decent audio, so users can deliver presentations without the need for external sound systems.

The connectivity options of the MP721C are robust, featuring multiple input ports such as VGA, composite video, and S-Video, ensuring compatibility with a wide range of devices including laptops, cameras, and DVD players. Additionally, the projector includes USB connectivity, allowing users to display images directly from USB drives.

The projector is designed with user convenience in mind. It offers features such as automatic vertical keystone correction, which helps to eliminate image distortion when the projector is not perfectly aligned with the screen. The easy-to-use on-screen menu simplifies the process of adjusting settings, making it accessible for presenters of all technical skill levels.

Moreover, the BenQ MP721C is energy-efficient, with a long lamp life that can reach up to 4000 hours in economic mode, reducing maintenance costs and downtime. Its compact and portable design makes it easy to transport, allowing for quick setup in different locations.

In summary, the BenQ MP721C is an adaptable projector, combining brightness, connectivity, and user-friendly features. Whether in the classroom or a boardroom, it provides an effective solution for making presentations stand out, while ensuring reliability and longevity for regular use.
Top Page Image Contents