BenQ MP721C Remote control, Exit, Adjusts the focus of the projected image, Freeze, 5Up, 6 Down

8.Power indicator light (Refer to "Indicators" on page 51 for more information.) Lights up or flashes when the projector is under operation.

9.3 Left

10.Right 4(Refer to "Correcting keystone" on page 29 for more information.)

When the on-screen menu is not activated, #9 and #10 function as Keystone -/+hot keys.

11.6Menu (Refer to "Using the menus" on page 38 for more information.) Turns on the on-screen display control menu.

12.5Exit

Exits and saves the menu settings.

When the on-screen menu is activated, the #9 to #12 buttons are used as directional arrows to select the desired menu items and to make adjustments.

13.Focus ring (Refer to "Fine-tuning the image size and clarity" on page 29 for more information.)

Adjusts the focus of the projected image.

14.Zoom ring (Refer to "Fine-tuning the image size and clarity" on page 29 for more information.)

Adjusts the size of the image. Rotate clockwise to enlarge the image or rotate counter- clockwise to reduce the image size.

Remote control

1

2

3

4

5

3

6

7

8

9

10

11

12

13

14

1.Power (Refer to "Start up" on page 25 and "Shutting down the projector" on page 36 for more information.)

Turns the projector on or off.

2.Freeze

The image is frozen when Freeze is pressed. An icon " " will display in the lower right corner of the screen. To release the function, press Freeze again.

3.5Up, 6 Down

Introduction 9