Panasonic PV-GS120 Playing Back a Tape, Finding a Scene You Want to Play Back, To Stop Playback

Playback Mode

Playback Mode

Playing Back a Tape

The recorded scene can be played back immediately after the recording.

1Set the [OFF/ON] Switch (43) to [ON].

≥The [POWER] Lamp (41) lights up.

(41)POWER

ªAdjusting the Sound Volume

To adjust the volume, push the [`VOL/JOG_] Lever (46) to display the [VOLUME] Indication. Push the [`VOL/JOG_] Lever towards [T] to increase the volume or push the [`VOL/JOG_] Lever towards [W] to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.

VOL/JOG

	ON
(43)	OFF

2Set the Mode Dial (39) to Tape Playback

Mode.

(39)	S
	PC
	D

3Press the [6] Button (19) to rewind the tape.

(19) STILL

sENTER i

FADE

≥Rewind the tape to the point where you want to start playback.

≥When the tape reaches the beginning, rewinding stops automatically.

4Press the [1] Button (17) to start playback.

≥The [!] Indication appears.

STILL

(17) s ENTER i

FADE

≥If a cassette recorded with a copyright protection signal is played back, the picture is distorted by mosaic-like patterns.

To Stop Playback

Press the [∫] Button (18).

STILL

(18)

sENTER i

FADE

W T

(46)

To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.

≥The sound volume cannot be adjusted using the Remote Controller in Playback Zoom Mode. (-44-)

≥For other notes concerning this item, see -75-.

Finding a Scene You Want to Play Back

ªCue/Review Playback

STILL

sENTER i

FADE

(19)(16)

If the [5] Button (16) or [6] Button (19) is pressed during Playback, it turns to Cue Playback

Aor Review Playback B.

A B

≥If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.

-42-