Panasonic PV-GS120 operating instructions Image Stabilizer Function, Fade In/Out Functions

Recording Mode

Image Stabilizer Function

If the Camcorder is shaken while recording, the camera shake in the image can be corrected.

≥If the Camcorder shakes too much, the images

may not be stabilized.

1Set [TAPE RECORDING MENU] >> [CAMERA] >> [EIS] >> [ON].

STILL

s ENTER i

2When the image is completely gone, press the Recording Start/Stop Button (42) to start recording.

(42)

3 Release the [FADE] Button (18) about

3 seconds after starting recording.

(14)

FADE

MENU

≥The image reappears gradually.

Fade Out

≥The [EIS] Indication appears.

EIS

2Press the Recording Start/Stop Button (42) or [PHOTO SHOT] Button (47) to start recording.

PHOTO

(47)SHOT

(42)

To Cancel Image Stabilizer Function

Set [TAPE RECORDING MENU] >> [CAMERA] >> [EIS] >> [OFF].

≥For other notes concerning this item, see -73-.

Fade In/Out Functions

Fade In

Fade In brings out images and sounds gradually from a black screen at the beginning of a scene.

1Keep pressing the [FADE] Button (18) during the Recording Pause Mode.

STILL

sENTER i

(18)FADE

≥The image fades out gradually.

Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene.

1Keep pressing the [FADE] Button (18) while recording.

STILL

sENTER i

(18)FADE

≥The image fades out gradually.

2When the image is completely gone, press the Recording Start/Stop Button (42) to stop recording.

(42)

3Release the [FADE] Button (18).

≥The still picture cannot fade in or fade out.

Backlight Compensation Function

This prevents the subject from being recorded too darkly when backlit. (Backlight is the light that shines from behind the subject being recorded.)

1Press the [BACK LIGHT] Button (8).

BACK LIGHT

(8)

-33-