BenQ MP723 user manual Operating the Laser pointer, Indicator light 22. D. Zoom +

Page 12

13.

Indicator light

22. D. ZOOM (+, -)

 

Flashes or lights red when any key on the

Magnifies or reduces the projected image

 

remote control is pressed.

size. See "Magnifying and searching for

14.

MODE

details on the projected picture" on page 33

 

Depending upon which input signal is

for details.

 

selected, selects an available picture mode.

Operating the LASER pointer

 

See "Selecting a picture mode" on page 35

 

for details.

The LASER Pointer is a

 

presentation aid for

15.

FREEZE

professionals. It emits red

 

Freezes the projected image. See "Freezing

 

colored light when you press it

 

the image" on page 41 for details.

and the indicator lights up red.

16.

MUTE

The laser beam is visible. It is

 

 

 

Toggles projector audio between on and

 

 

 

necessary to press and hold

 

off.

 

LASER for continuous output.

 

 

 

 

 

 

 

17.AUTO

 

Automatically determines the best picture

Do not look into the laser light window or

 

shine the laser light beam on yourself or

 

timings for the displayed image. See "Auto-

 

others. See the warning messages on the

 

adjusting the image" on page 32 for details.

back of the remote control and the enclosed

18.

Right/

''User Information'' prior to using it.

 

 

Locks the buttons on the projector. See

The laser pointer is not a toy. Parents should be

 

"Locking control keys" on page 42 for

mindful of the dangers of laser energy and keep

 

this remote control out of the reach of children.

 

details.

 

 

 

When the On-Screen Display (OSD) menu

 

 

is activated, the #4, #6 and #18 buttons are

 

 

used as directional arrows to select the

 

 

desired menu items and to make

 

 

adjustments. See "Using the menus" on

 

 

page 27 for details.

 

19.

SOURCE

 

 

Displays the source selection bar. See

 

 

"Switching input signal" on page 31 for

 

 

details.

 

20.

LASER

 

 

Emits visible laser pointer light for

 

 

presentation purposes. See "Operating the

 

 

LASER pointer" on the right for details.

 

21.

PAGE /

 

 

Operate your display software program (on

 

a connected PC) which responds to page up/down commands (like Microsoft PowerPoint). See "Remote paging operations" on page 40 for details.

12 Introduction

Image 12
Contents Welcome Table of contents Important safety instructions Refer servicing to qualified service personnelFuture reference Projector lamp is on Do not look straight at the projectorSafety Instructions Bedding or any other soft surface Allow at least 50 cm clearance from wallsResulting in damage to the projector Ceiling mounting the projector Projector features IntroductionIntroduction Shipping contents Projector exterior view Front/upper side Rear/lower sideLamp cover Controls and functions ProjectorRemote control CaptureIndicator light 22. D. Zoom + Operating the Laser pointerRemote control effective range Replacing the remote control batteriesApprox.15 Set Rear Ceiling in the System Setup Basic Positioning your projectorChoosing a location Front TableObtaining a preferred projected image size Page Maximum zoom Minimum zoom Screen Center of lens Projection distance1219 1500Connecting a computer or monitor Connecting a computerConnection Iii Connecting a monitor With a VGA cable With a VGA to DVI-A cableConnecting Video source devices Connecting AudioBest video quality Better video qualityConnecting a DVI source device Connecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceDevice Connecting a composite Video source device To connect the projector to a composite Video source deviceProjection lamp Press I I Power on the projector or remote OperationStarting up the projector OperationUsing the menus Use / to highlight the System Setup Basic menuUsing a security cable lock Utilizing the password functionSecuring the projector Removing the control keypad on the projectorSetting a password If you forget the passwordTo the Security Settings Respectively represent 4 digitsEntering the password recall procedure Changing the passwordDisabling the password function Enter a new passwordSwitching input signal Changing Color SpaceAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityOn the projector or remote Control Correcting keystoneSelecting the aspect ratio About the aspect ratioUsing Wall Color Selecting a picture modePC/DVI-A/DVI-D Signal Input Optimizing the imageFine-tuning the image quality in user modes Setting the User 1/User 2 modeAdjusting Brightness Adjusting ContrastAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant ColorEvery adjustment made will reflect to 3D Color ManagementSetting the presentation timer You want the timer to show up on the screen byTo cancel the timer, perform the following steps How to use the Timer ON/SHOW button?Remote paging operations Button is a multi-functional keyHiding the image Freezing the imageUtilizing FAQ function Go to the System Setup Basic Panel Key LockLocking control keys Setup Advanced High Altitude Mode, select On Operating in a high altitude environmentCreating your own startup screen To activate the High Altitude Mode, go to the SystemAdjusting the sound Adjusting the sound levelTurning off the Power on/off ring tone Personalizing the projector menu displayShutting down the projector Approximately 90 seconds to cool down the projectorMenu operation Menu systemBasic AdvancedDisplay menu Source menuPicture menu System Setup Basic menu System Setup Advanced menu Information menu Maintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Loosen the screw that secures the lamp Maintenance Replacing the lampTighten the screw that secures the lamp Resetting the lamp timer Restart the projectorIndicators Troubleshooting Remote control does not workProjector does not turn on No pictureSpecifications Projector specificationsDimensions Mm W x 131.30 mm H x 304.99 mm D 274.87 48.57 SpecificationsTiming chart Horizontal Vertical Pixel Resolution Frequency Mode KHz MHzSignal Format Horizontal Vertical Frequency Frequency kHz Supported timing for PC including DVI-D input15.73 Specifications Supported timing for Video and S-Video inputs15.73 15.63Warranty and Copyright information Limited warrantyCopyright DisclaimerRegulation statements FCC statementEEC statement Weee directive