BenQ MP512 ST, MP522 ST Connecting a composite Video source device, Audio cable Video cable

Page 23

Connecting a composite Video source device

Examine your Video source device to determine if it has a set of unused composite Video output sockets available:

If so, you can continue with this procedure.

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a composite Video source device:

1.Take a Video cable and connect one end to the composite Video output socket of the Video source device.

2.Connect the other end of the Video cable to the VIDEO socket on the projector.

3.If you wish to make use of the projector (mixed mono) speaker(s) in your presentations, take a suitable audio cable and connect one end of the cable to the audio output socket of the device, and the other end to the AUDIO socket of the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 39 for details.

The final connection path should be like that shown in the following diagram:

Audio cable

AV device

Video cable

MP522 ST

MP512 ST

Audio cable

Video cable

 

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting audio" on page 19 for details.

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

You need only connect to this device using a composite Video connection if Component Video and S-Video inputs are unavailable for use. See "Connecting Video source devices" on page 19 for details.

Connection 23

Image 23
Contents MP512 ST/MP522 ST Digital Projector WelcomeTable of contents Do not look straight at the projector Important safety instructionsRefer servicing to qualified service personnel Future reference Projector lamp is onSafety Instructions Do not block the ventilation holes This Apparatus Must be Earthed Ceiling mounting the projectorIntroduction Projector featuresIntroduction Shipping contents MP512 ST External control panel Projector exterior viewFront/upper side Rear/lower side MP522 STProjector Controls and functionsRemote control Pull out the battery holder Remote control effective rangeReplacing the remote control battery Choosing a location Positioning your projectorObtaining a preferred projected image size Page Projection dimensions To connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer ConnectionTo connect the projector to a monitor Connecting a monitorBetter video quality Connecting Video source devicesConnecting audio Best video qualityTo connect the projector to an Hdmi device Connecting an Hdmi deviceComponent Video to VGA D-Sub adaptor cable Audio cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device Cable Video cable Connecting an S-Video source deviceTo connect the projector to an S-Video source device Audio cable Video cable Connecting a composite Video source deviceTo connect the projector to a composite Video source device Operation OperationStarting up the projector Use / to highlight the System Setup Basic menu Using the menusSecurity Settings Utilizing the password functionSetting a password If you forget the passwordEnter a new password Entering the password recall procedureChanging the password Disabling the password functionChanging color space Switching input signalSignal Fine-tuning the image clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Magnifying and searching for detailsAbout the aspect ratio Selecting the aspect ratioOptimizing the image Selecting a picture modePicture modes for different types of signals PC input signals D-Sub / Comp. analog RGBAdjusting Brightness Using Wall ColorFine-tuning the image quality in user modes Setting the User 1/User 2 modeAdjusting Brilliant Color Adjusting ColorAdjusting Tint Adjusting SharpnessPress Mode/Enter and the 3D Color Management page displays Top-Left Bottom-Left Top- Right Bottom-Right Setting the presentation timerHiding the image To cancel the timer, perform the following stepsHow to use the Timer On key? Freezing the image Utilizing FAQ functionOr go to the System Setup Basic Panel Locking control keysOperating in a high altitude environment Adjusting the soundAdjusting the sound level Turning off the Power on/off ring toneShutting down the projector Personalizing the projector menu displayMain menu Sub-menu Options Menu operationMenu system Language BasicSecurity System Setup AdvancedPicture Mode Equivalent lamp hourDescription of each menu Auto Power TemperatureSave Settings TimerLock Sleep TimerSettings Panel KeySecurity System Setup Advanced menuReset All LampCurrent FAQ-Image InstallationFeatures Service Information menuCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp mode as EconomicSetting Auto Power Off Lamp informationTiming of replacing the lamp Replacing the lamp Loosen the screw that secures the lamp MaintenancePage Tighten the screw that secures the lamp Resetting the lamp timerSetup Advanced Lamp Settings menu Displays. Press to highlight Reset lampIndicators Troubleshooting Projector specifications SpecificationsMHz DimensionsRefresh rate Horizontal Clock Resolution Mode Mm W x 90 mm H x 214 mm D 255 61.5Video Hdcp Resolution ModeSupported timing for Hdmi Hdcp input-MP512 ST Supported timing for PC input-MP522 ST Signal FormatDisclaimer Warranty and Copyright informationLimited warranty CopyrightWeee directive Regulation statementsFCC statement EEC statement

MP512 ST, MP522 ST specifications

The BenQ MP522 ST and MP512 ST are compact projectors designed to deliver impressive performance for both education and business environments. These models stand out for their versatility, high-quality image output, and user-friendly features.

The BenQ MP522 ST is known for its Short Throw technology, enabling it to project large images from a short distance. This feature is particularly beneficial in smaller rooms where space is limited. The projector can produce a 60-inch image from just over two feet away, making it ideal for classroom settings and small meeting rooms. The MP522 ST boasts a brightness of 2800 ANSI lumens, ensuring clear and vibrant presentations even in well-lit environments. With a native resolution of XGA (1024 x 768), it delivers sharp and detailed visuals, making text and images easy to read.

On the other hand, the BenQ MP512 ST shares many of the same features while offering slightly different specifications. The MP512 ST also uses Short Throw technology, allowing it to project large images in limited spaces. With a brightness of 2500 ANSI lumens, it provides adequate illumination for various settings. This projector also supports a native resolution of XGA, ensuring excellent image quality for presentations and videos.

Both projectors utilize DLP technology, known for its reliability and high-quality images. DLP projectors typically have better color accuracy and contrast ratios compared to other technologies, resulting in vivid and lifelike images. Furthermore, the long-lasting lamp life of up to 4000 hours in Eco mode enhances cost efficiency and reduces maintenance needs over time.

Another notable characteristic of both models is their connectivity options, which include multiple VGA inputs, a composite video input, and a USB port. This variety allows for easy connections to laptops, video sources, and even USB drives, making them versatile tools for presentations and multimedia sharing.

Both BenQ MP522 ST and MP512 ST projectors emphasize portability and ease of use. Their lightweight design and compact size make them easy to transport, while features such as automatic keystone correction simplify setup and ensure optimal image alignment.

In summary, the BenQ MP522 ST and MP512 ST projectors are excellent choices for users seeking high-quality, compact projectors with superior image performance. Their short throw capabilities, robust brightness, and extended lamp life, coupled with DLP technology, make them reliable solutions for a range of applications in education and business environments.