BenQ MP522 ST, MP512 ST Locking control keys, Freezing the image, Utilizing FAQ function

Page 38

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except Power.

1. Press / on the projector or remote control

or go to the SYSTEM SETUP: Basic > Panel

Key Lock menu, and select On by pressing /

on the projector or remote control.

2. A confirmation message displays. Select Yes to confirm.

To release panel key lock, press and hold / for 3 seconds on the projector or remote control.

You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock and press / to select Off.

• Keys on the remote control are still in use when panel key lock is enabled.

If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on.

Freezing the image

Press on the remote control to freeze the image. The word 'FREEZE' will display in the upper left corner of the screen. To release the function, press any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen on screen.

Utilizing FAQ function

The INFORMATION menu contains possible solutions to problems encountered by users regarding image quality, installation, special feature operation and service information.

To get the FAQ information:

1. Press / on the projector or remote control or press Menu/Exit to open the OSD menu and press / to highlight the

INFORMATION menu.

2. Press to highlight FAQ-Image and Installation or FAQ-Features and Service

based on the information you want to know.

3.Press Mode/Enter.

4.Press / to select a problem and press Mode/Enter for possible solutions.

5.Press Menu/Exit to exit the OSD.

To exit the OSD menu, press Menu/Exit.

38 Operation

Image 38
Contents Welcome MP512 ST/MP522 ST Digital ProjectorTable of contents Future reference Projector lamp is on Important safety instructionsRefer servicing to qualified service personnel Do not look straight at the projectorSafety Instructions Do not block the ventilation holes Ceiling mounting the projector This Apparatus Must be EarthedIntroduction Projector featuresIntroduction Shipping contents MP522 ST Projector exterior viewFront/upper side Rear/lower side MP512 ST External control panelControls and functions ProjectorRemote control Pull out the battery holder Remote control effective rangeReplacing the remote control battery Positioning your projector Choosing a locationObtaining a preferred projected image size Page Projection dimensions Connection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorBest video quality Connecting Video source devicesConnecting audio Better video qualityConnecting an Hdmi device To connect the projector to an Hdmi deviceComponent Video to VGA D-Sub adaptor cable Audio cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device Cable Video cable Connecting an S-Video source deviceTo connect the projector to an S-Video source device Audio cable Video cable Connecting a composite Video source deviceTo connect the projector to a composite Video source device Operation OperationStarting up the projector Using the menus Use / to highlight the System Setup Basic menuIf you forget the password Utilizing the password functionSetting a password Security SettingsDisabling the password function Entering the password recall procedureChanging the password Enter a new passwordChanging color space Switching input signalSignal Auto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratioPC input signals D-Sub / Comp. analog RGB Selecting a picture modePicture modes for different types of signals Optimizing the imageSetting the User 1/User 2 mode Using Wall ColorFine-tuning the image quality in user modes Adjusting BrightnessAdjusting Sharpness Adjusting ColorAdjusting Tint Adjusting Brilliant ColorPress Mode/Enter and the 3D Color Management page displays Setting the presentation timer Top-Left Bottom-Left Top- Right Bottom-RightHiding the image To cancel the timer, perform the following stepsHow to use the Timer On key? Locking control keys Utilizing FAQ functionOr go to the System Setup Basic Panel Freezing the imageTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Operating in a high altitude environmentPersonalizing the projector menu display Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system Basic LanguageEquivalent lamp hour System Setup AdvancedPicture Mode SecurityDescription of each menu Timer TemperatureSave Settings Auto PowerPanel Key Sleep TimerSettings LockLamp System Setup Advanced menuReset All SecurityInformation menu FAQ-Image InstallationFeatures Service CurrentMaintenance Care of the projectorLamp information Setting Lamp mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Loosen the screw that secures the lamp Maintenance Replacing the lampPage Displays. Press to highlight Reset lamp Resetting the lamp timerSetup Advanced Lamp Settings menu Tighten the screw that secures the lampIndicators Troubleshooting Specifications Projector specificationsMm W x 90 mm H x 214 mm D 255 61.5 DimensionsRefresh rate Horizontal Clock Resolution Mode MHzVideo Hdcp Resolution ModeSupported timing for Hdmi Hdcp input-MP512 ST Signal Format Supported timing for PC input-MP522 STCopyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement Regulation statementsFCC statement Weee directive

MP512 ST, MP522 ST specifications

The BenQ MP522 ST and MP512 ST are compact projectors designed to deliver impressive performance for both education and business environments. These models stand out for their versatility, high-quality image output, and user-friendly features.

The BenQ MP522 ST is known for its Short Throw technology, enabling it to project large images from a short distance. This feature is particularly beneficial in smaller rooms where space is limited. The projector can produce a 60-inch image from just over two feet away, making it ideal for classroom settings and small meeting rooms. The MP522 ST boasts a brightness of 2800 ANSI lumens, ensuring clear and vibrant presentations even in well-lit environments. With a native resolution of XGA (1024 x 768), it delivers sharp and detailed visuals, making text and images easy to read.

On the other hand, the BenQ MP512 ST shares many of the same features while offering slightly different specifications. The MP512 ST also uses Short Throw technology, allowing it to project large images in limited spaces. With a brightness of 2500 ANSI lumens, it provides adequate illumination for various settings. This projector also supports a native resolution of XGA, ensuring excellent image quality for presentations and videos.

Both projectors utilize DLP technology, known for its reliability and high-quality images. DLP projectors typically have better color accuracy and contrast ratios compared to other technologies, resulting in vivid and lifelike images. Furthermore, the long-lasting lamp life of up to 4000 hours in Eco mode enhances cost efficiency and reduces maintenance needs over time.

Another notable characteristic of both models is their connectivity options, which include multiple VGA inputs, a composite video input, and a USB port. This variety allows for easy connections to laptops, video sources, and even USB drives, making them versatile tools for presentations and multimedia sharing.

Both BenQ MP522 ST and MP512 ST projectors emphasize portability and ease of use. Their lightweight design and compact size make them easy to transport, while features such as automatic keystone correction simplify setup and ensure optimal image alignment.

In summary, the BenQ MP522 ST and MP512 ST projectors are excellent choices for users seeking high-quality, compact projectors with superior image performance. Their short throw capabilities, robust brightness, and extended lamp life, coupled with DLP technology, make them reliable solutions for a range of applications in education and business environments.