BenQ MP511 user manual Correcting keystone, Press to correct keystoning at the bottom of the image

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.

To correct this, besides adjusting the height of the projector, you will need to manually correct it following ONE of these steps.

1.Press or on the control panel of the

projector or remote control to display the

status bar labelled Keystone. Press to correct keystoning at the top of the image.

Press to correct keystoning at the bottom of the image.

2.Press MENU/Exit on the projector or remote control. Go to DISPLAY > Keystone and

adjust the values by pressing or on the projector or remote control.

For example,

		•	Press	on the projector or remote
			control.
		•	Press	on the projector or remote
			control when you are in the Picture >
Keystone			Keystone menu.
	0				Keystone
		•	Press		on the projector or remote
			control.
		•	Press		on the projector or remote
			control when you are in the Picture >
			Keystone menu.
Keystone
		0			Keystone

+6

-6

Magnifying and searching for details on the projected picture

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

•Using the remote control

1.Press D. ZOOM + to display the Zoom bar. The center of the

picture will be magnified when the key is pressed again. Press the key repeatedly until the picture size is suitable for your need.

2. Use the directional arrows (, , , ) on the projector or remote control to navigate the picture.

The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details.

3.To restore the picture to its original size, press AUTO. You can

also press D. ZOOM -. When the key is pressed again, the picture is further reduced until it is restored to the original size.

Operation 29