4.Press 
Down to highlight Timer Position and set the timer position by pressing 
Left/ 
Right.
Upper left 
lower left 
upper right 
lower right
5.Press 
Down to highlight Timer Counting Direction and select your desired counting direction by pressing 
Left/ 
Right.
5 min | 5 min |
5 min | 5 min |
Selection | Description |
Count Up | Increases from 0 to the preset time. |
|
|
Count down | Decrease from the preset time to 0. |
|
|
6.Press 
Down and press 
Left/ 
Right to select On. Press MODE/Enter to confirm.
7.A confirmation message displays. Highlight Yes and press MODE/Enter to confirm. You will see the message “Timer is On” displaying on the screen. The timer
start counting at the time the timer is on. To cancel the timer, perform the following steps.
Basic Setup
Are you sure to turn on the
presentation timer?
Yes No
1.Enter the SYSTEM SETUP: Basic > Presentation Timer menu and select Off. Press MODE/Enter to confirm.
2.A confirmation message displays. Highlight Yes and press MODE/Enter to confirm. You will see the message “Timer is Off ” displaying on the screen.
How to use the TIMER On button?
The button is a multi-functional key.
• If the presentation timer is off, pressing this button displays a confirmation message. You can decide whether to activate the timer or not by following the
• If the timer is already on, pressing this button displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the
Hiding the image
In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. Press any button on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden. When this function is activated with an audio input connected, the audio can still be heard.