BenQ MP511 user manual Picture menu

Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
Picture Mode	Pre-defined picture modes are provided so you can optimize your
(PC: Dynamic;	projector image set-up to suit your program type. See "Selecting a picture
	mode" on page 31 for details.
YPbPr/ S-Video/
Video:
Standard)
Reference	Selects an picture mode that most suits your need for the image quality
	and further fine-tune the image based on the selections listed on the same
Mode
	page below.
Brightness	Adjusts the brightness of the image.
	See "1. Adjusting brightness" on page 32 for details.
Contrast	Adjusts the degree of difference between dark and light in the image.
	See "2. Adjusting contrast" on page 32 for details.
	Adjusts the color saturation level -- the amount of each color in a video
Color	image. Lower setting produces less saturated colors; setting to the
	minimum value makes the image black and white. If the setting is too
(0)
	high, colors on the image will be overpowering, which makes the image
	unrealistic.
Tint	Adjusts the red and green color tones of the image. The higher the value,
	the more greenish the image becomes. The lower the value, the more
(0)
	reddish the image becomes.
Sharpness	Adjusts the image to make it look sharper or softer.
(15)
Brilliant	Adjusts white peaking while maintaining correct color presentation.
Color	When Brillian Color is set as Off, the color temperature adjustment
(On)	will not function.
Color	There are four color temperature settings are available.
Temperature	See "3. Selecting a color temperature" on page 32 for details.
3D Color	See "4. 3D Color Management" on page 33 for details.
Management
Save	Saves the settings made for User 1 or 2 mode.
Settings

44 Operation