BenQ MP511 user manual Warranty and Copyright information, Limited warranty, Disclaimer

Page 59

Warranty and Copyright information

Limited warranty

BenQ warrants this product against any defects in material and workmanship, under normal usage and storage.

Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.

Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be in- between 10% and 90%, temperature in-between 0°C and 40°C, altitude lower than 10000 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and you may have other rights which vary from country to country.

For other information, please visit www.BenQ.com.

Copyright

Copyright 2007 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are copyrights of their respective companies or organizations.

Warranty and Copyright information

59

Image 59
Contents Welcome Table of contents Magnifying and searching for details MaintenanceTroubleshooting Specifications Regulation statements Do not look straight at the projector Important safety instructionsRefer servicing to qualified service personnel Future reference Projector lamp is onSafety Instructions 3000 m Resulting in damage to the projector Bedding or any other soft surfaceAllow at least 50 cm clearance from walls Ceiling mounting the projector Introduction Projector featuresIntroduction Shipping contents Under view Projector exterior viewFront/upper side Rear sideProjector Controls and functionsRight/Panel Key Lock AutoRight Remote controlTimer On Timer SetupPull out the battery holder Remote control effective rangeReplacing the remote control battery Choosing a location Positioning your projectorObtaining a preferred projected image size Page Screen Center of lens Projection distance Screen DiagonalConnection Connecting a computerConnection To connect the projector to a laptop or desktop computerLeast video quality Connecting Video source devicesBest video quality Better video qualityTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video or a composite Video source deviceOperation OperationStart up Buttons Up , Right, Down Utilizing the power-on lock functionSetting a password If you forget the passwordEnter the old password Entering the password recall procedureChanging the password Disabling the power-on lock functionGo to Source Quick Auto Search menu Switching input signalFine-tuning the image size and clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageFor example Correcting keystonePress to correct keystoning at the bottom of the image Selecting the aspect ratio Optimizing the image Selecting a picture modeSetting the User 1/User 2 mode Go to the Picture Picture Mode menuAdjusting contrast Using Wall ColorFine-tuning the image quality in user modes Adjusting brightness3D Color Management About color temperaturesOther adjustments Setting the presentation timerButton is a multi-functional key How to use the Timer On button?Hiding the image Freezing the image Locking control keysOperating in a high altitude environment Utilizing FAQ functionShutting down the projector Personalizing the projector menu displayVideo source Dynamic Menu operationMenu system PC source DynamicLanguage Lamp mode Normal/EconomicBasic AdvancedInformation Source Use Left/ Right to select the Display menu Using the menusStatus Press Display menu Picture menu Source menu System setup Basic menuSystem setup Advanced menu Security Reset AllLamp Information menu Care of the projector MaintenanceCalculation of lamp hour Lamp informationReplacing the lamp Page Restart the projector Temperature informationTighten the screw that secures the lamp Illustration IndicatorsStand-by mode Powering upLight Status & Description Power Temp Lamp Thermal events Troubleshooting Projector specifications SpecificationsSupported timing for Video and S-Video inputs Timing chartSupported timing for PC input Supported timing for Component-YPbPrinputDisclaimer Warranty and Copyright informationLimited warranty CopyrightWeee directive Regulation statementsFCC statement EEC statement