BenQ W1500 Power indicator, Message and meaning, Mode Refresh rate Hz Frequency kHz Clock MHz

1080/60p	1920x1080	60	67.5	148.5
1080/24p*	1920x1080	24	27	74.25

*Supported timing for 3D signal with Frame Packing format.

•Supported timing for PC input

Resolution	Mode	Refresh rate (Hz)	H-frequency (kHz)	Clock (MHz)
640 x 480	VGA_60	59.94	31.469	25.175
	VGA_72	72.809	37.861	31.5
800 x 600	SVGA_60	60.317	37.879	40
	SVGA_72	72.188	48.077	50
1024 x 768	XGA_60	60.004	48.363	65
	XGA_70	70.069	56.476	75
1366 x 768	60	60	47.7	85.5
1280 x 768	1280 x	59.87	47.776	79.5
	768_60
1280 x 1024	SXGA_60	60.02	63.981	108
1360 x 768	1360 x	60.015	47.712	85.5
	768_60

Power indicator

	Status	LED
	Step 1: Power On	none
	Step 2: Registration	slow blinking
	Step 3: Linking	slow blinking
	Step 4: Connected	none
	Step 5: Play Video	solid
Message and meaning

Message	Meaning
	If the wireless network between the projector and the HDMI device has
Linking	been established before, when power is on, this message appears to
	notify that the network is making connection.
Wireless off	Notifies wireless network failure after searching for three minutes.
Connecting to BenQ Tx	Notifies a successful connection with the HDMI device.
Connected to BenQ Tx,	Notifies no signal from the HDMI device.
please check video source

26 Important safety instructions