BenQ W1500 user manual System Setup menu, Advanced Setup menu

Page 55

System Setup menu

Function

Description

Language

Sets the language for the On-Screen Display (OSD) menus. See "Using the

menus" on page 31 for details.

 

Splash Screen

Allows you to select which logo screen will display during projector start-up.

You can choose BenQ logo screen, Blue screen or Black screen.

 

Projector Position

The projector can be installed on a ceiling or behind a screen, or with one or

more mirrors. See "Choosing a location" on page 15 for details.

 

Auto Off

Prevents unnecessary projection when no signal is detected for a long time. See

"Setting Auto Off" on page 59 for details.

 

Sleep Timer

Sets the auto-shutdown timer. The timer can be set to a value between 30

minutes and 3 hours.

 

 

Menu Display Time

 

Sets the length of time the OSD will remain active after your last key press.

Menu Settings

Menu Position

Sets the On-Screen Display (OSD) menu position.

 

Blank Reminder Message

 

Sets whether the blank reminder message is displayed by the projector while

 

the image is hidden.

 

 

Input Source

Selects an input source to be projected. See "Selecting an input source" on

page 30 for details.

 

 

 

Source Rename

Renames the source to your desired name. See "Selecting an input source" on

page 30 for details.

 

 

 

 

Sets whether the projector searches automatically for input sources. If the

Auto Source Search

source scan is On, the projector will scan for input sources until it acquires a

signal. If the function is not activated, the projector selects the last used input

 

 

source.

 

 

Advanced Setup menu

Function

Description

 

Reset Lamp Timer

 

Once the lamp is renewed, select Reset to return the lamp timer to "0". See

Lamp Settings

"Resetting the lamp timer" on page 62 for details.

Equivalent Lamp Hour

 

 

Shows the lamp hour information. See "Getting to know the lamp hour" on

 

page 59 for details.

 

 

 

HDMI Format

 

Selects an input source type for the HDMI signal. You can also manually select

 

the source type. The different source types carry different standards for the

 

brightness level.

HDMI Settings

HDMI Format is only available when the HDMI signal is selected.

CEC

 

 

Enables or disables the CEC function. When you connect an HDMI CEC-

 

compatible device to your projector with an HDMI cable, turning on the HDMI

 

CEC compatible device automatically turns on the projector, while turning off

 

the projector automatically turns off the HDMI CEC compatible device.

 

 

 

Selects a baud rate that is identical with your computer’s so that you can

Baud Rate

connect the projector using a suitable RS-232 cable and update or download

the projector’s firmware. This function is intended for qualified service

 

 

personnel.

 

 

Important safety instructions

55

Image 55
Contents W1500 Digital Projector Home Cinema Series Table of contents Warranty and Copyright information Table of contents Important safety instructions Important safety instructions Avoid volatile liquids Moisture condensationDisposal Overview Shipping contentsRemote control effective range Replacing the remote control batteriesCeiling mounting the projector Important safety instructions Projector features Audio L/R input jacks Projector exterior viewFront and upper side view Rear and lower side view RS-232 control portControl panel Controls and functionsRemote control Choosing a location Positioning your projectorDetermine the aspect ratio of your screen, 169 or 43? Obtaining a preferred projected image sizeImportant safety instructions Installation for a 169 ratio screen Projection dimensionsScreen aspect ratio is 43 and the projected picture is Installation for a 43 ratio screenFloor Installation Ceiling Installation Screen dimensions Projection distance D Lowest HighestTo use the lens shift lever Shifting the projection lens verticallyPreparations Connecting with video equipmentConnecting Hdmi devices Connecting S-Video or video devices Connecting component-video devicesConnect the projector to a computer with a VGA cable Connecting a computerProduct specification Using the Wireless TransmitterSupported timing for wireless Hdmi input timing Status Power indicatorMode Refresh rate Hz Frequency kHz Clock MHz Message and meaningSettings menu, select Add New Video Source Wireless transmitter synchronizationSet Wireless Sync to On When the Select Video Source menu displays, select SettingsImportant safety instructions Turning the projector on Using the projectorPreparations Sharpen the picture by rotating the focus ring Selecting an input sourceSecuring the projector Using the menusUsing a security cable lock Use / to highlight the System Setup menuAs the picture indicates, the four arrow keys Utilizing the password functionSetting a password If you forget the passwordWrite down the number and turn off your projector Entering the password recall procedureChanging the password Disabling the password functionAdjusting the projection angle Adjusting the projected imageCorrecting picture distortion Setting the User 1/User 2/User 3 mode Using the preset and user modesSelecting a preset mode Fine-tuning the selected picture modeAdjusting Contrast Fine-tuning the picture qualityResetting the picture mode Adjusting BrightnessAdjusting Flesh Tone Adjusting ColorAdjusting Tint Adjusting SharpnessAdvanced picture quality controls Setting Black LevelSetting a preferred color temperature To set a preferred color temperatureAdjusting Brilliant Color Selecting a Gamma settingColor Management Setting 3D Comb Filter Setting Film ModeTo leave and save the settings, press MENU/EXIT Turning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound level Switching the left/right audio channelsAbout the aspect ratio Selecting the aspect ratioFreezing the image Using the test patternMagnifying and searching for details Operating in a high altitude environment To activate High Altitude ModeUsing the OSD menu To display the PIP window Using the remote controlDisplaying more than one image source simultaneously Connecting 3D video devices Watching 3D contentUsing the 3D menus Locking control keys Personalizing the projector menu displayTo lock the keys Turning the projector off Main menu Sub-menu Options Audio SetupOn-Screen Display OSD menus On-Screen Display OSD structureDisplay System Setup Auto OffAdvanced SetupInformation Function Description Picture -- Basic menuAudio Setup menu Display menu Advanced Setup menu System Setup menuTest Pattern High Altitude ModePassword Reset All SettingsInformation menu Care of the projector Additional informationGetting to know the lamp hour Lamp informationExtending lamp life Diminished Timing of replacing the lampUntil the next hour lamp warning appears Press MODE/ENTER to dismiss the messageReplacing the lamp Do not turn on the power with lamp cover removedConnect the power and restart the projector Resetting the lamp timerPower Temp Lamp Status & Description IndicatorsLamp Status & Description Format TroubleshootingProblem Cause Remedy Your Blu-ray Disc is not in 3DSpecifications Ceiling mount installation DimensionsResolution Mode Refresh rate Freq. KHz Clock MHz Timing chartSupported timing for PC input 1920 x 59.939/60 67.432/67.5 148.35/148.5 Supported timing for Hdmi Hdcp input 1400 x SXGA+60 59.978 65.317 121.750 Timing Resolution Freq. Hz Freq. KHz Dot Clock Freq. MHzVideo Mode Freq. KHz Freq. Hz Sub-carrier Frequency MHz Resolution Mode Refresh rate Hz Freq. KHz Clock MHzSupported timing for Video and S-Video inputs Disclaimer Warranty and Copyright informationWarranty Copyright
Related manuals
Manual 66 pages 57.13 Kb