BenQ MW851UST Function Description, Operation, Panel Key, Lock, Background, Color Splash, Screen

Page 46

4. SYSTEM SETUP: Basic menu

Function

 

Description

 

 

 

Direct Power On

 

 

 

 

 

 

Allows the projector to turn on automatically once the power is fed

 

through the power cord.

 

 

 

Signal Power On

 

 

 

Sets whether to turn the projector directly on without pressing the

 

 

POWER key on the projector when the projector is in standby mode

 

 

 

 

 

and the signal is feed through the VGA cable.

 

 

 

Auto Power Off

 

 

 

Allows the projector to turn off automatically if no input signal is

 

detected after a set period of time. See "Setting Auto Power Off" on page

 

51 for details.

 

 

 

Quick Cooling

 

 

 

Enables or disables the Quick Cooling function. Selecting On enables

Operation

the function and projector cooling time will be shortened from a normal

90-second duration to approximately 30 seconds.

 

 

Settings

 

 

 

This function is only available when Instant Restart is off.

 

 

 

Instant Restart

 

 

 

Selecting On enables you to restart the projector immediately within 90

 

seconds after turning it off.

 

 

 

 

This function is only available when Quick Cooling is off.

 

Blank Timer

 

 

 

Sets the image blank time when the Blank feature is activated, once

 

elapsed the image will return to the screen. See "Hiding the image" on

 

page 33 for details.

 

 

 

Sleep Timer

 

 

 

Sets the auto-shutdown timer. The timer can be set to a value between 30

 

minutes and 12 hours.

 

 

 

 

 

 

 

Panel Key

Disables or enables all panel key functions except

 

POWER on the

 

 

Lock

projector and keys on the remote control. See "Locking control keys" on

page 33 for details.

 

 

 

 

 

 

 

 

 

 

Background

Sets the background color for the projector.

 

 

Color

 

 

 

 

Splash

Allows you to select which logo screen will display during projector

start-up. The following options are available: BenQ logo, My Screen,

Screen

Black screen, Blue screen.

 

 

 

 

 

 

 

 

Captures and stores the projected picture as My Screen. See "Creating

My Screen

your own startup screen" on page 34 for details.

 

 

 

In the unlikely event that the capturing action fails, change your

 

 

 

 

target picture.

 

 

46 Operation

Image 46
Contents Welcome Table of contents Safety Instructions Important safety instructionsRefer servicing to qualified service personnel Safety Instructions Locations where the altitudes are higher Locations near fire alarmsLocations with an ambient temperature Confined. Allow at least 50 cm clearanceInstallation Inverted images for ceiling mountIntroduction Projector featuresIntroduction Shipping contents Projector exterior view Front/upper side Rear/lower sideControls and functions Projector Test Remote controlON/OFF Keystone/Arrow buttons / Up DownMIC/VOL + Operating the Laser pointerMute Numeric buttonsRemote control effective range Replacing the remote control batteryChoosing a location Positioning your projectorFront Ceiling Projection dimensions Obtaining a preferred projected image size808 Screen Size Distance from Screen in mmDiagonal Inches 1524 1778 1508 942Connection Terminal name Terminal appearance Connecting video source devicesConnecting audio BestAbout the microphone input Audio Settings Microphone Volume menuPlaying sound through the projector DeviceStarting up the projector OperationOperation Fine-tuning the image clarity Adjusting the projected imageAuto-adjusting the image Correcting keystoneFollowing example describes how to set the OSD language Using the menusUse / to highlight the System Setup Basic menu Setting a password Using a security cable lockUtilizing the password function Highlight Change Security Settings and press MODE/ENTEREntering the password recall procedure If you forget the passwordWrite down the number and turn off your projector Disabling the password function Changing the passwordEnter a new password Switching input signal Changing Color SpaceMagnifying and searching for details Selecting the aspect ratioScreen with a 169 aspect ratio Projectors native resolution in its Displayed in the centerAbout the aspect ratio Aspect alterationSetting the User 1/User 2 mode Using Wall ColorSelecting a picture mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes 3D Color Management Press To highlight Saturation and adjust itsEvery adjustment made will reflect to Range at 0, only pure red in the projectedCount Up Increases from 0 to the preset time Count Down Setting the presentation timerTo cancel the timer, perform the following steps Selection DescriptionHiding the image Remote paging operationsFreezing the image Locking control keysOperating in a high altitude environment To activate the High Altitude ModeCreating your own startup screen Controlling the projector through a LAN environment Adjusting the soundCable connection Controlling the projector remotely through a web browser If you are in a non-DHCP environmentIiii Iiiv Press Exit to go back to the remote network operation Direct power off Shutting down the projectorMenu system Menu operationMain menu Sub-menu Options Min/25 min/30 min System Setup BasicSleep Timer Hr/8 hr/12 hrAdvanced Description of each menu Save Settings Picture ModeTemperature Display menu Picture menu Function Description TeachingSearch TimerSettings Color SpacePanel Key Function DescriptionOperation LockAudio System Setup Advanced menu Function Description HighAltitude LampStandby System Setup Advanced menu Function DescriptionReset All NetworkSystem Information menu Function DescriptionCurrent StatusMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Use the handle to slowly pull the lamp out of the projector Resetting the lamp timer Connect the power and restart the projectorTime will be reset to Light Status & Description Power events IndicatorsLamp events Troubleshooting Specifications Projector specificationsDimensions Mm W x 236.9 mm H x 322.8 mm D 339 SpecificationsWall mount installation Minimum installation requirements975 1173 1189 1181 960 Ceiling Minimum Ceiling Height mm = f + H + b + 60 + 221+ cWall plate Timing chart Supported timing for PC inputSupported timing for Hdmi Hdcp input Timing Supported timing for Component-YPbPrinputHorizontal Supported timing for Video and S-Video inputs Copyright Warranty and Copyright informationLimited warranty Disclaimer