BenQ MX880UST System Setup Advanced menu Function Description Panel Key, Lock, Background, Screen

Page 57

4. SYSTEM SETUP: Basic menu

5. SYSTEM SETUP: Advanced menu

	Function	Description
	Panel Key
		Disables or enables all panel key functions except		POWER on the

	Lock	projector and keys on the remote control. See "Locking control keys" on
		page 34 for details.


	Background	Sets the background color for the projector.
	Color
	Splash	Allows you to select which logo screen will display during projector
		start-up. The following options are available: BenQ logo, My Screen,
	Screen
		Black screen, Blue screen.

		Captures and stores the projected picture as My Screen. See "Creating
	MyScreen	your own startup screen" on page 34 for details.
		In the unlikely event that the capturing action fails, change your

		target picture.
	Quick	Enables or disables the Quick Cooling function. Selecting On enables
		the function and projector cooling time will be shortened from a normal
	Cooling
		90-second duration to approximately 30 seconds.

	High	A mode for operation in high altitude areas. See "Operating in a high
	Altitude
		altitude environment" on page 34 for details.
	Mode


		Mute
	Audio	Volume
		Microphone Volume
	Settings
		Power On/Off Ring Tone

		See "Adjusting the sound" on page 35 for details.

		Lamp Mode
		See "Setting Lamp Mode as Economic" on page 61 for details.
	Lamp	Reset lamp timer
		See "Resetting the lamp timer" on page 65 for details.
	Settings
		Equivalent Lamp Hour

		See "Getting to know the lamp hour" on page 61 for details on how the
		total lamp hour is calculated.

		Change Password
		You will be asked to enter the current password before changing to a new
	Security	one. See "Utilizing the password function" on page 24 for details.
		Change Security Settings
	Settings
		Power On Lock

		Splash Screen Lock
		See "Utilizing the password function" on page 24 for details.

Operation 57

Image 57

Contents MX880UST Model Name MX712 UST Digital ProjectorTable of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Safety Instructions Confined. Allow at least 50 cm clearance Inverted images for ceiling mount InstallationIntroduction Projector featuresShipping contents Projector exterior view Controls and functions Test Remote controlAuto Keystone/Arrow buttons / Up DownMute Operating the Laser pointerMIC/VOL + Numeric buttonsRemote control effective range Replacing the remote control batteriesOperating the projector from the front Choosing a location Positioning your projectorFront Table Front CeilingObtaining a preferred projected image size Projection dimensionsConnection Connecting audio Connecting video source devicesTerminal name Terminal appearance Component Video Better Good NormalAbout the microphone input Playing sound through the projectorPage Starting up the projector OperationAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image clarityCorrecting keystone Highlight Using the menusUtilizing the password function Using a security cable lockSetting a password Highlight Change Security Settings and press MODE/ENTEREntering the password recall procedure If you forget the passwordChanging the password Disabling the password functionSwitching input signal Selecting the aspect ratio Magnifying and searching for detailsAbout the aspect ratio Selecting a picture mode Using Wall ColorSetting the User 1/User 2 mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes 3D Color Management To cancel the timer, perform the following steps Setting the presentation timerSelection Description Top-Left Bottom-Left Top-Right Bottom-RightRemote paging operations Utilizing FAQ functionFreezing the image Hiding the imageLocking control keys To activate the High Altitude ModeOperating in a high altitude environment Creating your own startup screenAdjusting the sound level Adjusting the soundAdjusting the microphone volume Turning off the Power On/Off Ring ToneCable connection Controlling the projector through a LAN environmentIf you are in a Dhcp environment If you are in a non-DHCP environmentHighlight Wireless LAN and press MODE/ENTER Wireless connectionControlling the projector remotely through a web browser Page Page Iii Operation Page Operation Page Downloading and installing Q Presenter Using Q PresenterDisplaying images through Q Presenter Operation Operation Presenting from a USB Reader Shutting down the projector Direct power offMenu system Menu operationMain menu Sub-menu Options BasicAdvanced Advanced Network Description of each menu Temperature Picture ModeSave Settings Display menu Picture menu Function Description TeachingTimer System Setup Basic menu Function Description Quick AutoSettings SearchLock System Setup Advanced menu Function Description Panel KeyBackground Color SplashReset All System Setup Advanced menu Function DescriptionBaud Rate Test PatternCurrent Features ServiceSystem StatusCare of the projector MaintenanceSetting Auto Power Off Setting Lamp Mode as EconomicLamp information Getting to know the lamp hourStatus Message Timing of replacing the lampReplacing the lamp Page Tighten the screws that secure the lamp cover Resetting the lamp timerLight Status & Description Power events IndicatorsLamp events Thermal eventsTroubleshooting Projector specifications SpecificationsWall mount installation DimensionsSupported timing for PC input Timing chartSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsTiming Limited warranty Warranty and Copyright informationCopyright DisclaimerFCC statement for United States users Regulation statementsEEC statement for European users Weee directive