BenQ MX880UST Indicators, Light Status & Description Power events, Lamp events, Thermal events

Page 66

Indicators

Light

Status & Description

					Power events

	Orange	Off	Off	Stand-by mode.
	Green	Off	Off	Powering up.
	Flashing	Off	Off	Powering up.
	Flashing
	Green	Off	Off	Normal operation.
				• The projector needs 90 seconds to cool down as it was
					abnormally shut down without the normal cooling down
					process.
	Orange	Off	Off	• The projector needs to cool for 90 seconds after the power
	Flashing	Off	Off		is turned off.
	Flashing				is turned off.
				• The projector has shut down automatically. If you try to re-
					start the projector, it will shut down again. Please contact
					your dealer for assistance.

					Lamp events
	Orange	Off	Red	The projector has shut down automatically. If you try to re-
	Orange			start the projector, it will shut down again. Please contact your
	Flashing
	Flashing			dealer for assistance.
				dealer for assistance.

	Off	Off	Red	1.	The projector needs 90 seconds to cool down. Or
	Off	Off	Red	2.	Please contact your dealer for assistance.
				2.	Please contact your dealer for assistance.

Thermal events

Off	Red	Off
Off	Red	Red
Off	Red	Green
Off	Red	Orange
Red	Red	Red
Red	Red	Green
Red	Red	Orange
Green	Red	Red
Green	Red	Green
Green	Red	Orange
Orange	Red	Red
Orange	Red	Green
Orange	Red	Orange
Off	Green	Red
Off	Green	Green

The projector has shut down automatically. If you try to re- start the projector, it will shut down again. Please contact your dealer for assistance.

66 Maintenance

Image 66

Contents Digital Projector MX880UST Model Name MX712 USTTable of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Safety Instructions Confined. Allow at least 50 cm clearance Installation Inverted images for ceiling mountProjector features IntroductionShipping contents Projector exterior view Controls and functions Auto Remote controlTest Keystone/Arrow buttons / Up DownMIC/VOL + Operating the Laser pointerMute Numeric buttonsRemote control effective range Replacing the remote control batteriesOperating the projector from the front Front Table Positioning your projectorChoosing a location Front CeilingProjection dimensions Obtaining a preferred projected image sizeConnection Terminal name Terminal appearance Connecting video source devicesConnecting audio Component Video Better Good NormalPlaying sound through the projector About the microphone inputPage Operation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image clarityCorrecting keystone Using the menus HighlightSetting a password Using a security cable lockUtilizing the password function Highlight Change Security Settings and press MODE/ENTERChanging the password If you forget the passwordEntering the password recall procedure Disabling the password functionSwitching input signal Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Setting the User 1/User 2 mode Using Wall ColorSelecting a picture mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes 3D Color Management Selection Description Setting the presentation timerTo cancel the timer, perform the following steps Top-Left Bottom-Left Top-Right Bottom-RightFreezing the image Utilizing FAQ functionRemote paging operations Hiding the imageOperating in a high altitude environment To activate the High Altitude ModeLocking control keys Creating your own startup screenAdjusting the microphone volume Adjusting the soundAdjusting the sound level Turning off the Power On/Off Ring ToneIf you are in a Dhcp environment Controlling the projector through a LAN environmentCable connection If you are in a non-DHCP environmentWireless connection Highlight Wireless LAN and press MODE/ENTERControlling the projector remotely through a web browser Page Page Iii Operation Page Operation Page Downloading and installing Q Presenter Using Q PresenterDisplaying images through Q Presenter Operation Operation Presenting from a USB Reader Direct power off Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Advanced Network Description of each menu Save Settings Picture ModeTemperature Display menu Picture menu Function Description TeachingSettings System Setup Basic menu Function Description Quick AutoTimer SearchBackground System Setup Advanced menu Function Description Panel KeyLock Color SplashBaud Rate System Setup Advanced menu Function DescriptionReset All Test PatternSystem Features ServiceCurrent StatusMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Page Resetting the lamp timer Tighten the screws that secure the lamp coverLamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Specifications Projector specificationsDimensions Wall mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsTiming Copyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement for European users Regulation statementsFCC statement for United States users Weee directive