6.Press 
to highlight Gain and adjust its values to your preference by pressing 
/ 
. The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately.
7.Repeat steps 3 to 6 for other color adjustments.
8.Make sure you have made all of the desired adjustments.
9.Press MENU/EXIT to exit and save the settings.
Selecting a Film Mode
Highlight Film Mode in the PICTURE: Advanced menu and select by pressing 
/ 
on the projector or remote control.
On is the default and recommended selection for this projector. When Off is selected, the Film Mode function is not available.
This function is only available when Video or
Selecting a 3D Comb Filter
Highlight 3D Comb Filter in the PICTURE: Advanced menu and select by pressing 
/ 
on the projector or remote control.
3D Comb Filer separates the Y and C signals while simultaneously processing three consecutive horizontal scan lines. While comparing three consecutive horizontal scan lines within a single video frame, it also analyzes each frame in advance, ensuring the best possible picture.
On is the default and recommended selection for this projector. When Off is selected, the 3D Comb Filter function is not available.
This function is only available when Video or
Hiding the image
In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the screen while the image is hidden. When this function is activated with an audio input connected, the audio can still be heard.
You can set the blank time in the SYSTEM SETUP >
Operation Settings > Blank Timer menu to let the projector return the image automatically after a period of time when there is no action taken on the blank screen. The length of time can be set from 5 to 30 minutes in
Do not block the projection lens from projecting as this could cause the blocking object to become heated.
Setting the Sleep Timer
You can set the Sleep Timer interval so the projector powers off after the specified time period of inactivity (regardless of signal).
Set the sleep timer in the SYSTEM SETUP > Operation Settings > Sleep Timer from among Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/ 12hr.