BenQ W1200 user manual System Setup menu Information menu

5. SYSTEM SETUP menu

6. INFORMATION menu

FUNCTION	DESCRIPTION
High Altitude	A mode for operation in high altitude areas. See "Operating in a high
Mode	altitude environment" on page 36 for details.
	Lamp Mode
	See "Setting Lamp Mode as Economic" on page 50 for details.
Lamp	Reset lamp timer
Settings	See "Resetting the lamp timer" on page 54 for details.
	Equivalent Lamp Hour
	See "Getting to know the lamp hour" on page 50 for details.
	Change password
	You will be asked to enter the current password before changing to a
Security	new one.
Settings	Change Security Settings
	Power on Lock
	See "Securing the projector" on page 26 for details.
	Selects a baud rate that is identical with your computer’s so that you
Baud Rate	can connect the projector using a suitable RS-232 cable and update or
	download the projector’s firmware. This function is intended for
	qualified service personnel.
LED Indicator	Selecting On enables the function and the POWER LED on the
	control panel lights when the project is in use.
Reset All	Returns all settings to the factory preset values.
	The following settings will still remain: PC & Component YPbPr
Settings
	Tuning, Language, Projector Position, High Altitude Mode,
	Security Setting and Baud Rate.
	Source
	Shows the current signal source.
	Picture Mode
	Shows the selected mode in the PICTURE: Basic menu.
Current	Resolution
	Shows the native resolution of the input signal.
System	Color System
Status
	Shows input system format, NTSC, PAL, SECAM, or RGB.
	Equivalent Lamp Hour
	Displays the number of hours the lamp has been used.
	Firmware Version
	Shows firmware version.

48 Operation