To display the PIP window:
•Using the remote control
Press PIP to display the PIP page and make adjustments by following the steps starting from step 3 in the section "Using the OSD menu" below.
When the PIP window is on, to change the PIP window size, press PIP Size repeatedly until a desired size is selected.
When the PIP window is on, to change the PIP window position, press PIP Pos repeatedly until a desired position is selected.
When the PIP window is on, to highlight one of the sources to make adjustments, press PIP Active repeatedly until the source is selected.
•Using the OSD menu
1.Press MENU/EXIT and then press 
/ 
until the DISPLAY menu is highlighted.
2.Press 
to highlight PIP and press MODE/ ENTER. The PIP page displays.
3.Highlight PIP and press 
/ 
to select On.
The projector will select two currently active signals to display and the last viewed picture will be displayed on the big screen as a main source.
The PIP function is effective at below source combinations.
|
| Source 2 | |
|
|
|
|
Source 1 | HDMI 1 |
| HDMI 2 |
|
|
|
|
Component | V |
| V |
|
|
|
|
PC | V |
| V |
|
|
|
|
Video | V |
| V |
|
|
|
|
V |
| V | |
|
|
|
|
4.To change the Main Source or Second Source, press 
to highlight Main Source or Second Source, use 
/ 
to highlight the source you want to display for the main (bigger) or second (smaller) window.
5.To make OSD settings to one of the two sources (main or second), highlight Active Window and press 
/ 
to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window. The following OSD menu function cannot work on the active windows for the PIP: Quick Auto Search.
6.To change the position of the smaller picture, highlight Position and press 
/ 
repeatedly until a suitable position is selected.
7.To resize the small picture, highlight Size and press 
/ 
to set the PIP size among Small or Large
8.To leave the OSD menu, press MENU/EXIT repeatedly until the menu disappears.