BenQ W1060 Menu display time, Menu position, Reminder Message, Direct Power On, Auto Power Off

4. SYSTEM SETUP: Basic menu

FUNCTION	DESCRIPTION
Language	Sets the language for the On-Screen Display (OSD) menus.
	See "Using the menus" on page 26 for details.
Projector	The projector can be installed on a ceiling or behind a screen, or with
	one or more mirrors.
Position
	See "Choosing a location" on page 15 for details.
	Menu display time
	Sets the length of time the OSD will remain active after your last key
Menu	press. The range is from 5 to 30 seconds in 5-second increments.
	Menu position
Settings
	Sets the On-Screen Display (OSD) menu position.
	Reminder Message
	Selecting On allows the projector to remind you to clean the filter.
	Direct Power On
	Powers projector on automatically when the power cable is connected.
	Auto Power Off
	Allows the projector to turn off automatically if no input signal is
	detected after a set period of time.
	See "Setting Auto Power Off" on page 53 for details.
	Quick Cooling
Operation	Enables or disables the Quick Cooling function.
	Selecting On enables the function and the projector cooling time will
Settings	be shortened from a normal 90 second duration to approximately 2
	seconds.
	Blank Timer
	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen.
	See "Hiding the image" on page 40 for details.
	Sleep Timer
	Sets the auto-shutdown timer. The timer can be set to a value between
	30 minutes and 12 hours.
	See "Setting the Sleep Timer" on page 40 for details.
Remote	Sets the preferred remote receiver (Front and Top) allowing the
Receiver	projector to accept signals from the remote control.
Background	Selects background appearance when there is no signal.
Color
Splash	Allows you to select which logo screen will display during projector
	start-up. Four options are available: BenQ logo, Blue screen, or Black
Screen	screen.
	See "Personalizing the projector menu display" on page 43 for details.

English

Operation 49