Adjusting The Projector's Elevator
WARNING
•Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn.
CAUTION
•To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjust- ment range of the elevator feet is 0 to 9 degrees.
1.Press and hold in the elevator buttons.
2.Raise or lower the projector to the desired height and then release the elevator but- tons. When you release the elevator buttons, the eleva- tor feet will lock into posi- tion.
3.As necessary, you can also finely adjust the height of the projector by twisting the ele- vator feet by hand.
Elevator buttons
Elevator feet
Using The Lens Shift Buttons
The lens of this projector can be shifted verti- cally. When you want to finely adjust the pic- ture position, use the LENS SHIFT buttons of the projector.
LENS SHIFT
LASER INDICATOR
LENS SHIFT | STANDBY/ON VIDEO | RGB | |
buttons | – | – | – |
| + | + | + |
| LENS SHIFT FOCUS ZOOM | ||
| BLANK ASPECT LASER | ||
Projector | Remote control | ||
6 Setting Up