BenQ PB9200 user manual Troubleshooting, Related Messages

Page 46

PB9200-e.book Page 40 Thursday, May 27, 2004 2:15 PM

Troubleshooting

Related Messages

When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.

memo Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

 

 

Message

Description

 

 

 

 

 

 

CHANGE THE LAMP

The time the lamp timer has counted is

 

 

approaching 2000 hours.

 

 

AFTER REPLACING LAMP,

 

 

Preparation of a new lamp, and an early lamp

 

 

RESET THE LAMP TIMER.

change is recommended. After you have change

 

 

 

the lamp, please be sure to reset the lamp timer.

 

 

CHANGE THE LAMP

The time the lamp timer has counted is

 

 

approaching 2000 hours, so a lamp change

 

 

 

 

AFTER REPLACING LAMP,

within ** hours is recommended.

 

 

When lamp usage reaches 2000 hours, the power

 

 

RESET THE LAMP TIMER.

 

 

will automatically be turned off.

 

 

 

 

THE POWER WILL TURN OFF

Please change the lamp by referring to the section

 

 

AFTER ** hr.

“Lamp”. After you have changed the lamp, please

 

 

 

be sure to reset the lamp timer.

 

 

 

 

 

 

CHANGE THE LAMP

As the time the lamp timer has counted has

 

 

 

 

AFTER REPLACING LAMP,

reached 2000 hours, the power will soon be

 

 

 

 

automatically turned off.

 

 

RESET THE LAMP TIMER.

Please immediately turn the power off, and

 

THE POWER WILL TURN OFF

change the lamp by referring to the section

 

 

AFTER 0 hr.

“Lamp”. After changing the lamp, please be sure

 

 

to reset the lamp timer.

 

 

 

 

 

 

 

(This table is continued to the following page.)

NOTE

 

•A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic shut-down function, such that the power will automatically be turned off when lamp usage time has reached 2000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this projector.

40 Troubleshooting

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Welcome Copyright Table of Contents Multifunctional Settings Iv Table of ContentsTroubleshooting Table of ContentsVi Table of Contents Projector Features Quick correction of distorted images electricallyPreparation PreparationProjector Part NamesProjector Rear/Left Control Buttons Remote ControlRemote Control Mouse left buttonReference for the 43 aspect ratio Setting UpArrangement Reference for the 169 aspect ratioAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices If using a BNC input If using a M1-D input to mouse controlComputerProjector If using a Scart RGB input If using a s-video signalIf using a component signal VCR/DVD Player ProjectorSpeaker Projector Connecting The Power SupplyMonitor Projector RGB OUTAbout The Laser Pointer Remote ControlPutting Batteries Operating The Remote Control Meters with a 60 degree range Degrees to the leftUsing The Mouse/Keyboard Control Function Using The Remote ID FeatureID Change switch Turning On The Power Power ON/OFFTurning Off The Power Selecting An Input Signal OperatingUsing The Automatic Adjustment Feature Selecting The Aspect RatioCorrecting The Keystone Distortion Adjusting The Picture PositionPress the Keystone button Muting The Sound Adjusting The VolumePress the Mute or Volume button to restore the sound Temporarily Blanking The ScreenUsing The Magnify Feature Freezing The ScreenDisplaying The Child Window Selecting An Audio InputEx. Turning off the built-in speaker Multifunctional SettingsUsing The Menu Functions EnterMain Menu Sharpness PICTURE-1 MenuGamma ColorMY Memory Position PhasePICTURE-2 Menu SizeInput Menu P. Posit PowerupP. Input InputPower OFF AdjustAuto Menu Search Video ComponentStart UP Screen MenuBlank LockTial setting How to register your picture as the MyScreenWorks Message of the Auto in Progress for the auto adjust MessageOption Menu Auto ServiceFanspee LensNetwork Menu SetupDhcp When your Network enables the Dhcp function Network Setting UpEx. Case of IP Address = Lamp For more information, call your dealer Screws Case of replacement by yourself Replacing The Lamp LampAir Filter Caring For The Air FilterCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesInputted signal is outside of the response Internal portion temperature is risingThere is no input signal Message DescriptionRegarding The Indicator Lamps Standby Lamp TempBecome heated Description IndicatorCooling fan is not operating Become overcooledPhenomena That May Easily Be Mistaken For Machine Defects Power switch is not set to the on positionInput changeover settings are mismatched These has not been properly fixedWindow is displayed Color settings are not correctly adjustedSound is muted Lens cap is attachedWarranty And After-Service Warranty And After-ServiceRGB input ports SpecificationsSpecification Video input ports
Top Page Image Contents