BenQ PB9200 user manual Projector Features, Quick correction of distorted images electrically

Page 7

PB9200-e.book Page 1 Thursday, May 27, 2004 2:15 PM

Projector Features

This multimedia projector is used to project various computer signals as well as NTSC/PAL/ SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.

•Ultra High Brightness

Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highlyefficient optical system.

•Whisper Mode Equipped

Special mode is available for reducing projector noise to achieve quieter operation.

•User Memory Function

This projector can memorize 4 settings by MY MEMORY function.

•Partial Magnification Function

Interesting parts of images can be magnified for closer viewing.

•Keystone Distortion Correction

Quick correction of distorted images electrically.

•Optical Lens Shift

The lens of this projector can be shifted vertically. When you want to finely adjust the pic- ture position, use the LENS SHIFT buttons.

Projector Features	1

Image 7

Contents Welcome Copyright Table of Contents Iv Table of Contents Multifunctional SettingsTable of Contents TroubleshootingVi Table of Contents Quick correction of distorted images electrically Projector FeaturesPreparation PreparationProjector Part NamesProjector Rear/Left Mouse left button Remote ControlRemote Control Control ButtonsReference for the 169 aspect ratio Setting UpArrangement Reference for the 43 aspect ratioUsing The Lens Shift Buttons Adjusting The Projectors ElevatorConnecting Your Devices If using a BNC input If using a M1-D input to mouse controlComputerProjector VCR/DVD Player Projector If using a s-video signalIf using a component signal If using a Scart RGB inputRGB OUT Connecting The Power SupplyMonitor Projector Speaker ProjectorAbout The Laser Pointer Remote ControlPutting Batteries Meters with a 60 degree range Degrees to the left Operating The Remote ControlUsing The Mouse/Keyboard Control Function Using The Remote ID FeatureID Change switch Turning On The Power Power ON/OFFTurning Off The Power Operating Selecting An Input SignalSelecting The Aspect Ratio Using The Automatic Adjustment FeatureCorrecting The Keystone Distortion Adjusting The Picture PositionPress the Keystone button Temporarily Blanking The Screen Adjusting The VolumePress the Mute or Volume button to restore the sound Muting The SoundFreezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowEnter Multifunctional SettingsUsing The Menu Functions Ex. Turning off the built-in speakerMain Menu Color PICTURE-1 MenuGamma SharpnessMY Memory Size PhasePICTURE-2 Menu PositionInput Menu Input PowerupP. Input P. PositPower OFF AdjustAuto Menu Video Component SearchLock Screen MenuBlank Start UPMessage How to register your picture as the MyScreenWorks Message of the Auto in Progress for the auto adjust Tial settingOption Menu Lens ServiceFanspee AutoNetwork Menu SetupDhcp When your Network enables the Dhcp function Network Setting UpEx. Case of IP Address = For more information, call your dealer LampLamp Case of replacement by yourselfReplacing The Lamp ScrewsCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingMessage Description Internal portion temperature is risingThere is no input signal Inputted signal is outside of the responseStandby Lamp Temp Regarding The Indicator LampsBecome overcooled Description IndicatorCooling fan is not operating Become heatedThese has not been properly fixed Power switch is not set to the on positionInput changeover settings are mismatched Phenomena That May Easily Be Mistaken For Machine DefectsLens cap is attached Color settings are not correctly adjustedSound is muted Window is displayedWarranty And After-Service Warranty And After-ServiceVideo input ports SpecificationsSpecification RGB input ports