BenQ PB9200 user manual Using The Remote ID Feature, Using The Mouse/Keyboard Control Function

Page 19

PB9200-e.book Page 13 Thursday, May 27, 2004 2:15 PM

Using The Remote ID Feature

This is the function to properly use when you use two or three same type projectors at the same time. This function should be used com- bining a setup of a projector.

1.Set the ID number to the projector beforehand, referring to the item “IR REMOTE ID” of the section “OPTION Menu”.

memo When the ALL is selected to the item “IR REMOTE ID” of the OPTION menu, the projector is controlled by a remote control irre- spective of the position of the ID CHANGE switch.

2.Slide the knob of the switch into the position of the ID number of the projector you want to control.

LASER INDICATOR

STANDBY/ON VIDEO RGB

+		+	+
LENS SHIFT	FOCUS		ZOOM
–		–	–
BLANK	ASPECT		LASER
PREVIOUS			NEXT
	MOUSE
ESC	MENU
POSITION	RESET		AUTO
MAGNFY	PinP		VOLUME
ON
	FREEZE
OFF
	KEYSTONE
	1	2
ID CHANGE

ID CHANGE switch

Using The Mouse/Keyboard Control Function

CAUTION

•Before connecting, read the manuals of the device you will connect. Mistaken use of the mouse/keyboard control could damage your equipment.

•Only connect to a PC or an USB Hub connected PC.

•Do not unplug the connector cables while the computer is operating.

Using the USB control feature, you can use the remote control as a simplified mouse or key- board of the computer.

Connect the M1-D port of the projector to the computer via the M1-D cable. Then func- tions illustrated below will be enabled.

memo The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

memo The function can be used only for the functions illustrated on the right.

memo The projector would be enu- merated as a mouse and a keyboard of HID (Human Interface Device) class devices, after connecting cable.

LASER INDICATOR

STANDBY/ON VIDEO RGB

	–	–	–	Mouse left button
	+	+	+
	LENS SHIFT	FOCUS	ZOOM
	BLANK	ASPECT	LASER
	PREVIOUS		NEXT	Mouse move pointer
		MOUSE		Mouse move pointer
	ESC	RESET		Keyboard
	ESC	MENU
	MAGNFY	PinP	MUTE	Arrow keys / /	/
	MAGNFY	PinP	VOLUME
	ON
	OFF
		1 2 3		Mouse right button
	ID CHANGE			Mouse right button
	(Front)				(Rear)
	(Front)			Keyboard	key
				Keyboard	key

Remote Control 13

Image 19

Contents Welcome Copyright Table of Contents Iv Table of Contents Multifunctional SettingsTable of Contents TroubleshootingVi Table of Contents Quick correction of distorted images electrically Projector FeaturesPreparation PreparationProjector Part NamesProjector Rear/Left Mouse left button Remote ControlRemote Control Control ButtonsReference for the 169 aspect ratio Setting UpArrangement Reference for the 43 aspect ratioUsing The Lens Shift Buttons Adjusting The Projectors ElevatorConnecting Your Devices If using a BNC input If using a M1-D input to mouse controlComputerProjector VCR/DVD Player Projector If using a s-video signalIf using a component signal If using a Scart RGB inputRGB OUT Connecting The Power SupplyMonitor Projector Speaker ProjectorAbout The Laser Pointer Remote ControlPutting Batteries Meters with a 60 degree range Degrees to the left Operating The Remote ControlUsing The Mouse/Keyboard Control Function Using The Remote ID FeatureID Change switch Turning On The Power Power ON/OFFTurning Off The Power Operating Selecting An Input SignalSelecting The Aspect Ratio Using The Automatic Adjustment FeatureCorrecting The Keystone Distortion Adjusting The Picture PositionPress the Keystone button Temporarily Blanking The Screen Adjusting The VolumePress the Mute or Volume button to restore the sound Muting The SoundFreezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowEnter Multifunctional SettingsUsing The Menu Functions Ex. Turning off the built-in speakerMain Menu Color PICTURE-1 MenuGamma SharpnessMY Memory Size PhasePICTURE-2 Menu PositionInput Menu Input PowerupP. Input P. PositPower OFF AdjustAuto Menu Video Component SearchLock Screen MenuBlank Start UPMessage How to register your picture as the MyScreenWorks Message of the Auto in Progress for the auto adjust Tial settingOption Menu Lens ServiceFanspee AutoNetwork Menu SetupDhcp When your Network enables the Dhcp function Network Setting UpEx. Case of IP Address = For more information, call your dealer LampLamp Case of replacement by yourselfReplacing The Lamp ScrewsCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingMessage Description Internal portion temperature is risingThere is no input signal Inputted signal is outside of the responseStandby Lamp Temp Regarding The Indicator LampsBecome overcooled Description IndicatorCooling fan is not operating Become heatedThese has not been properly fixed Power switch is not set to the on positionInput changeover settings are mismatched Phenomena That May Easily Be Mistaken For Machine DefectsLens cap is attached Color settings are not correctly adjustedSound is muted Window is displayedWarranty And After-Service Warranty And After-ServiceVideo input ports SpecificationsSpecification RGB input ports