BenQ PB9200 user manual Auto Menu, Adjust, Power OFF

PB9200-e.book Page 28 Thursday, May 27, 2004 2:15 PM

AUTO Menu

With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN	ADJUST
PICTURE-1	POWER OFF	0 min
PICTURE-2	POWER ON	TURN ON
INPUT	SEARCH	TURN ON
AUTO	RESET
SCREEN
OPTION
NETWORK
: SELECT

Item		Description
	Pressing the 4 (or the ENTER) button performs the automatic
	adjustment.
	■ At a RGB signal
	The vertical position (V POSITION), the horizontal position (H
	POSITION), the clock phase (H PHASE) and the horizontal size (H
	SIZE) will be automatically adjusted.
	memo Make sure that the application window is set to its maximum
	size prior to attempting to use this feature. Dark pictures may still be
	incorrectly adjusted. Use a bright screen when adjusting.
ADJUST	■ At a video signal
	The signal type mode best suited for the respective input signal will
	be selected automatically.
	memo This function is available only when the AUTO is selected to
	the item VIDEO of the INPUT menu. For a component video signal,
	the signal type is identified automatically independently of this func-
	tion.
	memo This operation requires approximately 10 seconds, and the
	message AUTO IN PROGRESS is displayed during the operation.
	memo This operation may not work well at some signals. If the pic-
	ture becomes unstable (ex. a irregular picture, a color lack), please
	select the suitable mode to the item VIDEO of the INPUT menu.
	Set the time using the 5 / 6 buttons. :
	Long (max. 99 minutes)		Short (min. 0 minute = DISABLE)
	AUTO		AUTO
	POWER OFF		POWER OFF
	ENABLE		DISABLE
POWER OFF	1min		0min

ex.

When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with

aproper signal (without no-signal and an unsuitable signal) reaches at the set time. Please refer to the section Turning Off The Power.

Select the TURN ON or the TURN OFF using the 5 / 6 buttons.:

TURN ON	TURN OFF
POWER ON When the TURN	ON is selected, you can turn the projector on with-
out pressing the STANDBY/ON button. Please refer to the section
“Turning On The Power”.
	(This table is continued to the following page.)

28 Multifunctional Settings