Input Menu

PB9200-e.book Page 26 Thursday, May 27, 2004 2:15 PM

With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MAIN	COLOR SPACE	AUTO
PICTURE-1	COMPONENT	COMPONENT
PICTURE-2	VIDEO	AUTO
INPUT	3D-YCS	TURN OFF
AUTO	VIDEO NR	LOW
SCREEN	P. INP. INPUT	VIDEO
OPTION	P. INP. POSIT.
NETWORK	POWERUP INPUT RGB
: SELECT

Item

Description

Select a color space mode using the 5 / 6 buttons. :

AUTO

RGB

SMPTE240

REC709

REC601

Selecting the AUTO automatically selects the optimum mode.

COLOR SPACE

memo This item can be selected only at a RGB signal or a compo-

nent video signal other than a COMPONENT port input of 525i/

625i/SCART RGB.

memo The AUTO operation may not work well at some signals. In

such a case, select the SMPTE240 or the REC709 for a HDTV signal.

Select a function of COMPONENT port using the 5 / 6 buttons. :

COMPONENT

SCART RGB

When the SCART RGB is selected, the COMPONENT port function

as a port for a SCART RGB signal input. Please refer to the section

Connecting Your Devices.

Select a signal type mode using the v buttons. :

AUTO

NTSC

PAL

SECAM

NTSC4.43

M-

PAL

N-PAL

Selecting the AUTO automatically selects the optimum mode.

VIDEO

memo This item is performs only at a video signal from the VIDEO

port or the SVIDEO port. For a component video signal, the signal

type is identified automatically independently of this function.

memo The AUTO operation may not work well at some signals. If

the picture becomes unstable (ex. a irregular picture, a color lack),

please select the mode depending on the input signal.

Select the TURN ON or the TURN OFF using the 5 / 6 buttons. :

TURN ON

TURN OFF

3D-YCS

When the TURN ON is selected, the 3D-YCS mode works for a com-

pletely still image, or images with few motions.

memo This item performs only at a video signal of NTSC3.58.

memo When this function performs, the setting of the item VIDEO

NR of this INPUT menu is not effective.

Select a noise reduction level using the 5 / 6 buttons. :

HIGH

MIDDLE

LOW

The noise on screen is reduced according to the selected level.

VIDEO NR

memo This item performs only at a video signal from the VIDEO

port or the SVIDEO port. At a video signal of NTSC3.58, this func-

tion performs only when the TURN OFF is selected to the item 3D-

YSC of this INPUT menu.

memo When this adjustment is excessive, certain degradation may

appear on the picture.

(This table is continued to the following page.)

26 Multifunctional Settings