Ampro Corporation P/N 5001795A REV A manual To Install the Sodimm into the ReadyPanel

Page 17

Chapter 2

ReadyPanel Components

Chassis

SODIMM

Figure 2-3. Bottom view of Chassis with SODIMM in Socket

To Install the SODIMM into the ReadyPanel

1.Make sure the ReadyPanel has been shut down and disconnected from the power source.

2.Follow the steps in the previous section to gain access to the SODIMM socket.

3.Install the SODIMM into the socket as shown in Figure 2-3.

ReadyPanel

User’s Guide

13

Image 17

Contents ReadyPanelTM User’s Guide Audience Assumptions Contents User’s Guide ReadyPanel Requirements ReadyPanel SetupUsing this Guide What’s in the Box Power SpecificationsPreparations Setting Up the Work SpaceLocating the I/O Connectors Installing Mounting HardwareTouch Screen Air VentsVGA Angle View of ReadyPanel I/O Panel Connecting the Power SupplyLinux 2.6 OS is shown as an example Applying Power to the ReadyPanelUser’s Guide ReadyPanel Tools Required ReadyPanel ComponentsOpening the ReadyPanel Enclosure To remove the cover of the ReadyPanelExploded View of ReadyPanel Assembly with Cover and Screws To Remove the Sodimm from the ReadyPanel See -2and Figure Replacing the ReadyPanel MemoryExploded View of Enclosure with Chassis and Board Bottom view of Chassis with Sodimm in Socket To Install the Sodimm into the ReadyPanelUser’s Guide ReadyPanel Http//ampro.custhelp.com Appendix a Technical SupportAppendix a