Ampro Corporation P/N 5001795A REV A manual Power Specifications, What’s in the Box

Page 6

Chapter 1

ReadyPanel Setup

Power Specifications

Table 1-1lists the current draw values of the ReadyPanel.

Table 1-1. System Current Draw

Parameter

+5VDC

+12VDC

Idle

2.11A (10.53W)

0.81A (9.75W)

 

 

 

In-rush*

Max: 2.64A (13.20W)

Max: 1.36A (16.32W)

Current

Min: 0.64A (3.20W)

Min: 0.16A (1.92W)

(Typical)

 

 

 

 

 

BIT** Current

2.73A (13.66W)

0.81A (9.67W)

(Typical)

 

 

 

 

 

Notes: *In-rush measured with CRT monitor, LCD panel, touch controller, touch screen, 256MB RAM, inverter, power, compact flash with Win XPe, keyboard and mouse.

**The BIT (burn in test) is conducted with the same criteria as In-rush plus two serial loopbacks, two USB jump drives, and one Ethernet port connection.

What’s in the Box

The Contents List identifies the items in the shipping container for the ReadyPanel QuickStart Kit. The first of multiple boxes may contain all of the accessories on the Contents List. See Figure 1-1.

ReadyPanel 6.5

DC Power In

Cable Adapter

Figure 1-1. ReadyPanel and Accessories

CD-ROM

Setup Steps

Make sure to follow the setup steps in this section in the exact order listed but skip any steps that do not apply to your needs. References are provided to chapters within this guide or other Ampro manuals for more information about installation and use of this ReadyPanel.

2

User’s Guide

ReadyPanel

Page 5 Page 7
Image 6
Page 5 Page 7
Contents ReadyPanelTM User’s Guide Audience Assumptions Contents User’s Guide ReadyPanel ReadyPanel Setup Using this GuideRequirements Power Specifications What’s in the BoxSetting Up the Work Space PreparationsTouch Screen Installing Mounting HardwareLocating the I/O Connectors Air VentsVGA Connecting the Power Supply Angle View of ReadyPanel I/O PanelApplying Power to the ReadyPanel Linux 2.6 OS is shown as an exampleUser’s Guide ReadyPanel Opening the ReadyPanel Enclosure ReadyPanel ComponentsTools Required To remove the cover of the ReadyPanelExploded View of ReadyPanel Assembly with Cover and Screws Replacing the ReadyPanel Memory To Remove the Sodimm from the ReadyPanel See -2and FigureExploded View of Enclosure with Chassis and Board To Install the Sodimm into the ReadyPanel Bottom view of Chassis with Sodimm in SocketUser’s Guide ReadyPanel Appendix a Technical Support Http//ampro.custhelp.comAppendix a
Top Page Image Contents