Ampro Corporation P/N 5001795A REV A manual Contents

Contents

Chapter 1	ReadyPanel Setup	1
About the ReadyPanel		1
Using this Guide		1
Requirements		1
Power Specifications		2
What’s in the Box		2
Setup Steps	.....................................................................................................................................	2
Preparations		3
Setting Up the Work Space		3
Installing Mounting Hardware		4
Locating the I/O Connectors		4
Connecting the Power Supply		6
Applying Power to the ReadyPanel		7

Chapter 2		ReadyPanel Components	9
ReadyPanel Assembly Procedures			9
Tools Required			9
Opening the ReadyPanel Enclosure			9
	To remove the cover of the ReadyPanel		9
Replacing the ReadyPanel Memory			11
	To Remove the SODIMM from the ReadyPanel (See Figure 2-2and Figure 2-3)		11
	To Install the SODIMM into the ReadyPanel		13
Appendix A		Technical Support	15
List of Figures
Figure	1-1.	ReadyPanel and Accessories	2
Figure	1-2.	Angle View of Enclosure with Mounting Hardware	4
Figure	1-3.	Flat View of ReadyPanel I/O Panel	5
Figure	1-4.	Angle View of ReadyPanel I/O Panel	6
Figure 2-1.		Exploded View of ReadyPanel Assembly with Cover and Screws	10
Figure	2-2.	Exploded View of Enclosure with Chassis and Board	12
Figure	2-3.	Bottom view of Chassis with SODIMM in Socket	13
List of Tables
Table 1-1.		System Current Draw	2
Table 1-2.		I/O Panel Connectors, Controls, and Indicators	5
Table A-1.		Technical Support Contact Information	15

ReadyPanel User’s Guide iii