Acer S5301WB, S5201B Download CS6209 LAN Firmware：for S5201, Condition：, System Action：

Download MCU Code, LAN and Firmware

1.Download WT61P803/WT6702 MCU Code：(in Low - Power Standby, for S5201 all series)

Condition：

Situation 1：MCU code is empty (The 1st time to plug in power cord)

Situation 2：MCU version update

System Action：

System needs a few sec to download MCU automatically.

Downloading：POWER and Temp LED will show red.

Download Success：System will go back Low-Power standby mode and Power

LED will show red.

Download Fail : POWER and Lamp LED will show red.

Notice：

Do NOT interrupt power when downloading.

2. Download CS6209 LAN Firmware：(for S5201)

Firmware Download Procedure：

1. Enter Factory Mode page 7

2. Under CS6209, set Lan Download On

3. Turn off projector, and the projector will download LAN firmware automatically.

System Action：

Downloading：POWER and LAMP LED will show RED. Download success : system will go back low-power standby mode and Power

LED will show RED.

3. Download AWIND Firmware：(for S5201B/S5301WB Extension board)

Awind firmware Upgrade procedure：

1.Turn on projector

2.Connect PC and projector RJ45 connector with CAT 5 wire directly

3.Change projector source to LAN source(must enter OSD to turn on LAN first)

4.Wait about 10~20 sec

5.Open PC Browser and enter 192.168.100.10

6.Please connect to web and click "Advance" to log in as root. (hint: password->123456)

27