Acer S5201B, S5301WB service manual Assembly FM Module, Assembly HSG ILL Module

2.Assembly FM Module:

Place FM on “HLD FM” surface(Fig. 2-1) and use “Clip FM” to fix FM(Fig. 2-2).

Clip FM hook the punch points

Fig. 2-1	Touch the	Fig. 2-2
	side surface

3.Assembly HSG ILL Module:

3.1CM Assembly

I.Insert “Clip CM Side” first, and then place “Clip Front CM” to fixed-shaft of ILL SUB before locking screw (Fig. 3-1, Fig. 3-2).

II. Assemble Mylar SUB HSG to HSG ILL well (Fig. 3-3).

III.Assemble CM to HSG ILL and to make CM contact three datum on the HSG ILL Well (Fig. 3-3).

IV. Assemble” MYLAR CM ” to the CMD firstly, “CLIP TOP CM”(with forceps) to the “HSG ILL” (Fig. 3-4,).

V. To check and make sure “CLIP of CM” hooks the HSG ILL very Well (Fig. 3-5).

VI. Paste “Sponge tube AL” on cannelure of” HSG ILL” (Fig. 3-6).

3.2FM Module Assembly

i.FM Module must be placed to fixed shaft and on the datum surface of “ILL SUB” and then lock with screw well (Fig. 3-7).

Clip CM Side	Fixed shafts
	of ILL SUB

Screw

Fig. 3-1 Fig. 3-2

49