Acer S5301WB, S5201B service manual CC1/CC2/CC3/CC4

	IEEE 802.3u compliance
	ANSI X3T12 TP-PMD 1995
	S5301WB :
	USB Type A for Wireless Dongle
	Compliant to following standards,
	IEEE 802.11b:up to 11 Mbps,2.4GHz.
	IEEE 802.11g:up to 54 Mbps,2.4GHz.
	IEEE 802.11n draft 6.0:up to 150Mbps,2.4GHz.
	S5201 / S5201B : Mini Type B x 1 Terminal for page
13.4 USB Connector	up/down
	S5301WB : Mini Type B x 1 Terminal for page up/down
	& USB mouse
14.0 User Interface	Adhere to Electrical Specification
	9 Keys:
14.1 Operator Keypad	Power ; Source ; Resync ; e ; Menu ; Left ; Right ;
	Up(Keystone-) ; Down(Keystone+)
14.2 Indicators	3 LEDs:
	Power On/Off Status; Lamp Status; Temperature Status
14.3 Electric Keystone	Manual vertical keystone and adjustable range ±40
	(3D display mode XGA timing adjustable range ±17)
14.4 Digital Zoom	S5201 :
(Only for S5201)	Digital zoom 2X
	Note：3D on, Digital Zoom 1.6X
	S5201B : N/A
15.0 Audio
15.1 PC Audio Input	Φ3.5mm stereo mini jack x 2
	500mVrms 10 KΩ or more
15.2 Mic Audio Input	Φ3.5mm stereo mini jack x 1
	Support dynamic & audio mix function
15.3 Audio output	Φ3.5mm mono mini jack x 1
15.4 Speaker	Speaker 4Ω 5W X 2, Amplifier 4W X 2
	VGA1 : Audio input 1
15.5 Audio input	VGA2, Composite, S-Video, Audio input 2
	(for S5201B/S5301WB : LAN, USB-A source don’t
	support audio function)
16.0 Lamp hour	Lamp hour = [Hour used in Normal Mode] + 3.5/5 *[Hour
	used in Eco. Mode]
17.0 Closed Caption (CC)
17.1 CC version	CC1/CC2/CC3/CC4
	After turn off projector, there is 120 seconds called
18.0 Instant On	“Instant On stage”. At this stage, user can turn on the
	projector. Aftet this stage, projector will cooling for 20
	seconds, and all keypads are not allowed to operate.
	Support DLP 3D PC source 100/120Hz and Video
19.0 3D Projection	source 50/60Hz
	(for S5201B/S5301WB : 3D on, Digital Zoom only can
	support to 1.6X)
20.0 DC output	DC power jack (Standby mode is off)
	Output 12V, 1A max
21.0 Smart Source Detection	1. HW source Detection：VGA1, VGA2, HDMI1, HDMI2

9