Acer S5201B, S5301WB service manual How to use Download Tool, Write Edid When write D-SUB/DVI Edid

3. How to use Download Tool :

Software Installation, Un-installation :

Unzip the “Q-EDID” program files in the same directory.

Install Q-EDID tool : Execute “Install Q-EDID.BAT” to install & register EDID Board into the computer.

Un-install Q-EDID tool : If you want to uninstall this tool, execute “Uninstall Q-EDID.BAT”, then it will remove EDID Board from the computer.

How to use Download Tool :

(1)Execute EDID Tools V0.16:

1.Run “Q-EDID-V016.exe”.

2.Program will appear as below picture.

(2) Write EDID:

•When write D-SUB/DVI EDID:

1.EDID Type Selection : Choose ‘‘EDID 128 Bytes’’.

2.Open Files : Click “Open File” to select file “*.DDC”

(Note : If your DDC file name is not like “*.DDC” (e.g. “*.2dc”), please rename it to “*.DDC”)

3.Write EDID : Click “Write EDID”, and it will execute writing process.

4.While complete, it will show message as ’’Write EDID OK…’’.

(Note : Check cable connection before write. It will show Write EDID OK even the connection is not stable.)

37