Acer S5301WB, S5201B service manual Optical Engine Dismantle SOP

Figure1 Figure2

(1)Disassemble the screw*3 (M2.5*L10), then take off the

engine. (Figure1)		1
	3	1	screw
11
		2	driver
(2) Disassemble the screw*2
(M3*L8) and take off BKT under	2
the engine. (Figure2)
	Figure1	Figure3	2

(1)Take off the ballast mylar (Figure1)

(2)Extract all the wire in the

ballast and the Dismantle the		1
screw*2(M3*L6), then take off the				Figure4
ballast.(Figure2)					1	screw
12 (3) Dismantle screw*2 (M3*L6)	Figure2
						driver
connecting the blower with the			2
machine and take off the the
blower.(Figure3)			3
(4) Dismantle screw*3 (M3*L8)
connecting the lamp box with the		Note: Circuit boards > 10cm2 has been highlighted with the yellow
machine and take off the		rectangle as above image shows. Please detach the Circuit boards
lampbox.(Figure4)		and follow local regulations for disposal.

		Optical Engine Dismantle SOP
Step Discription					Tool
	(1) Disassemble the ring
	focus.(pull it out with force.)
	(2) Disassemble the screws*3			1
	(M3*L6) connecting the len and
	take off the len carefully.
1	ATTENTION: DON'T TOUCH				screw
	THE LEN'S SURFACE OR			2	driver
		3
	BREAK THE LEN.
	(3) Disassemble the screws*3		PULL	3
	(M3*L4) connecting the frame
	and take off the frame.

	(1) Disassemble the spring
	screws*4(M3*L7.5) connecting		2
	the Hsink and take it off.	3
2	(2) Take off the chip under the					screw
	Heatsink and the baffle under		4			driver
		1
	the chip.
	(3) Rotate the switch to loose
			Note: Circuit boards > 10cm	2	has been highlighted with the yellow
	the chip and take it off.
			rectangle as above image shows. Please detach the Circuit boards
			and follow local regulations for disposal.

44