Barco R 9849999 installation manual Safety guidelines

Page 3

Safety guidelines

WHO

This installation manual must be performed by authorized technical personnel

 

only.

 

 

WARNING

The ceiling should be capable of supporting a weight of at least 5 times the total

 

weight of the Ceiling Mount and Projector (i.e. at least 160 kg or 353LB). If it

 

cannot, the ceiling must be reinforced. Improper installation may result in serious

 

personal injury.

 

Consult a professional structural engineer prior to suspending the Ceiling Mount

 

from a structure not intended for that use.

 

Always ensure the working load limit of the structure supporting the Ceiling Mount.

 

 

CAUTION

Installing the Ceiling Mount should be performed only after you are thoroughly

 

familiar with all of the following safety checks and installation instructions.

 

To do otherwise increases the risk of hazards and injury to the user.

 

This support is designed for intended use only with Barco CLM series projectors. It

 

supports maximum 33 kg or 73LB. Use with any other appliance/projector may

 

result in instability causing possible injury.

 

Do not modify and/or replicate any component. Barco n.v. uses specific materials

 

and manufacturing processes in order to achieve part strength. Consult Barco nv

 

for assistance with custom applications.

 

Always follow Barco installation instructions. Contact Barco n.v. if you should have

 

any question regarding the safety of an application.

 

 

PRODUCT CARE

Ceiling Mount components should be kept dry, clean, lubricated (if required),

 

coated properly, and otherwise maintained in a manner consistent with part

 

design. Barco products must be used in a manner consistent with their design and

 

inspected on a routine basis for security, wear, deformation, corrosion and any

 

other circumstances that may affect the load handling capability of the part.

 

Barco n.v. recommends inspections at least once a year for all installations and

 

increasing in frequency for more critical installations. If the part is found to have

 

damage, which may cause a decrease in load capability, the part must be removed

 

from service immediately.

 

Under no circumstances are Barco parts repariable by anyone other than Barco

 

n.v.

 

 

Image 3
Contents Ceiling Mount for CLM series projector Installation ManualBarco n.v Safety guidelines Description and Contents of the kit Llustration of the Cable Cover Assy RemarkCentering the ceiling mount Necessary ToolsFixation can be done with standard M8 bolt not supplied Projector preparation Slide Lift Up down Tilt Shift parallel to the screenRotate around Vertical axis ±5 Rotate around central Axis ±3 Rotate around central Horizontal axis Rotate around central Vertical axisMounting the bar with Cable Cover assembly Page Page Page RGB cables Power cord & other cables Cable Ties Rotate around R83578l