![](/images/new-backgrounds/1191272/19127239x1.webp)
Chapter 2 • Detailed Setup
4.After you turn on the projector and computer, if you want to raise or lower the projected image, just move the mirror assembly to the appropriate angle.
☞CAUTION! DO NOT use the assembly cover or projection mirror as a handle. TO AVOID DAMAGE, YOU MUST COMPLETELY CLOSE THE PROJECTOR BEFORE MOVING IT.
If you must move the projector while it is open, grasp it securely at the sides by the lower part of the housing to support the weight of the unit.
Figure
Moving the projector when open
Using an AV Tripod
On the bottom of the projector there is a connector that you can connect to a tripod. Use only a
User’s Guide •