![](/images/new-backgrounds/1191272/19127285x1.webp)
Chapter 3 • Using the Desktop Projector
Note: Press the MENU key twice in rapid succession to:
•Go directly to the Setup Menu, or
•Exit the Menu Window from the Levels Menu.
Hold down the MENU key for several seconds to calibrate Cyclops. For more information, refer to the Cyclops User’s Guide.
Note: You cannot use Cyclops and Proxima’s Presentation Control Software at the same time. To disable Cyclops and use the software, hold the MENU key on the Control Panel down when you turn the projector power on. This procedure will not work with the remote control. To
SYNC Keys
The SYNC keys compensate for fine variations in the timing of a computer's video signal. Sync is only used with computer video. Adjust this setting if you see uneven horizontal features, streaks or shimmering in a graphic image. Press the upper or lower SYNC key until the image stabilizes.
VIDEO Key
The VIDEO key is used to switch between computer video input, NTSC/PAL/SECAM video input, or
Note: If you would like to add video to
User’s Guide •