![](/images/new-backgrounds/1191272/191272117x1.webp)
Chapter 4 • Maintenance
Figure
Push the release lever to release the lamp
6.To close the chamber, firmly press down on the center rear edge of the cover until it latches. The lamp chamber latch will return to the center position. The power plug is now accessible.
7.Replace the power cord.
Changing Air Filters
To assure proper cooling, change or clean the three air intake filters after every 250 hours of operation. These filters are located on the left and right sides at the front of the projector’s lower case and under the grill in the top cover.
User’s Guide •