Chapter 2 • Detailed Setup
Turning On/Off the Lamp
When you first turn on the projector, the lamp will be on. To turn the Desktop Projector's lamp off, press the LAMP key on the Control Panel or remote control. Pressing the LAMP key again will turn the lamp on. The lamp turns on slowly to prolong lamp life.
Volume
Brightness
Sync
Video
Menu/ Lamp
OVERTEMP
REPLACE LAMP
Figure
The LAMP key
Note: Turning the lamp off does not cut power to the projector. The fans will still operate. You must move the AC POWER switch to the OFF position to completely power down the projector.
User’s Guide •