Proxima ASA Multimedia LCD Projectors manual Volume

Chapter 3 • Using the Desktop Projector

VOLUME

Use this setting to adjust the volume. Use the up or down arrow key to increase or decrease the volume level.

Note: For optimal sound control when using an external amplifier (such as a stereo system), preset the VOLUME setting to 50% (5 bars) before adjusting the volume on the amplifier to a comfortable listening level.

RGB Controls: RED, GREEN & BLUE

The RED, GREEN and BLUE controls are used to individually adjust the color signals. Use the up or down arrow key to increase or decrease the color signal level. These settings are simultaneously increased or decreased when the BRIGHTNESS control is adjusted.

TINT

The TINT setting (R and G) adjusts the Red or Green color balance for NTSC/PAL/SECAM video or S-video sources. It has no effect in other video modes. Use the up or down arrow keys to adjust the color signal balance.

SIG LEVEL

The SIG LEVEL setting is used by Audio/video-enabled models for NTSC/PAL/SECAM or S-VHS video contrast adjustment. Use the up or down arrow key to adjust the contrast in the projected image.

Note: If you would like to add video to audio-enabled models, you can order the Video Adapter Kit (A195). See Appendix B for ordering information.

3–6 • User’s Guide