Chapter 3 • Using the Desktop Projector
The Setup Menu
To access the Setup Menu, do either of the following:
•Push the MENU key to access the Levels Menu. Press the MENU key again to access the Setup Menu, or
•Press the MENU key twice to skip the first window and go directly to the Setup Menu.
SOURCE
VGA640x480
FREQUENCY
800
IMAGE
NORMAL
LANGUAGE
ENGLISH
COLORS
226981
STORE?
NO
PROJECTION
FORWARD
SETTINGS
FACTORY
Figure
Setup Menu
SOURCE
SOURCE is both a status and selection box. When you connect a video input to an
If the projector detects an NTSC source, it defaults to that setting. The projector cannot tell the difference between PAL or SECAM. When PAL or SECAM is used, the Desktop Projector defaults to PAL. The SOURCE setting allows you to select SECAM as the video source input. (Use the STORE command to set SECAM as the default.)
The Desktop Projector selects the best possible value based on the incoming signal. If the image doesn’t look right (wrong colors, image is off screen, image won’t sync properly, etc.), use the up or down arrow keys to make an alternate selection.
User’s Guide •