Chapter 3 • Using the Desktop Projector
Warning and Alert Lights
Factory Defaults
The first time you turn the Desktop Projector on, the initial factory settings are used. If you change any of these settings, you can recall all of the factory defaults by choosing FACTORY from the SETTINGS function.
Warning and alert lights located on the projector's control panel indicate the projector's operating condition.
Volume
Brightness
Sync
Video
Menu/ 
Lamp
OVERTEMP
REPLACE LAMP
Overtemp | Replace Lamp |
Warning Light | Alert Light |
Figure
Warning lights
OVERTEMP Warning Light
The OVERTEMP light illuminates in the unlikely event that the projector overheats. A thermostat automatically turns off power to the lamp until the projector cools.
User’s Guide •