PYLE Audio PLVHR72 instruction manual Specifications, Current Consumption 6 W Max Weight 154g

Page 24

Specifications:

LCD Drive Method: a-SITFT Active Matrix

Visible Screen Size: 7 Inch Wide Screen (Diagonal)

Aspect Ratio: 16:9

Display Format: 480 x RGB x 234

Number of Pixels: 336,960

Response Time: 15ms

Backlight : High Brightness CCFT

Luminance: 350 cd/m2 #3

Backlight Life: 10,000 Hrs #1

Contrast Ratio: 300:1

Viewing Angle: (H/V): 120o / 100o

Operation Temperature: -20oC ~ 70oC / -2oF ~ 158oF

Video Color System Input: NTSC & PAL Compatible

On Screen Display: English

Rear Video Input Terminals: RCA x 1 (1 Vp-p, 75 ohm)

Front Video Input Terminals: 3.5mm Jack x1 (1 Vp-p, 75 ohm)

Front Audio Input Terminals: 3.5mm Jack x1

Front Audio Output Terminals: 3.5mm Jack x1

Remote Control: Included

Volume / Brightness / Contrast / Saturation / Hue: Adjustable

Blue Screen: Yes

Power Input: DC12 Volts car battery (negative earth)

Current Consumption: 6 W Max

Weight: 154g

Size: 186 x 105 x 22.5 cm (L x W x H) 73.23 x 41.34 x 8.86 inch (L x W x H)

#1 A measure of the time unit screen brightness declines by half under continuous viewing in a car/room at 25oC with screen brightness in standard mode. (50% original brightness)

#2 A measure of the unit temperature declines in a car/room at 25oC with screen brightness in standard mode. (50% original brightness)

#3 A measure of the backlight 350cd/m2 brightness will in standard lamp voltage at 560 Vrms.

.

Pyle, Inc.

 

1600 63rd street

 

Brooklyn, NY 11204

0 6 8 8 8 8 8 8 0 0 0 8

23

Image 24
Contents PLVHR72 Table of Contents No picture, no sound Good picture, but no sound Dolled lines or stripesPrecautions Control and layout for the remote control Control and layout for the monitorAccessories Connection Diagram Replacing the Remote ControlSteps For Installing Headrest with Shroud Setup workMeasurements Cut the headrestInstall the headrest shroud Route the cable through the headrestRemoval Steps For Installing Sun-visor with Shroud Cut the visorInstall the sun-visor shroud Route the cable through the visorInsert the monitor Rear side of headrest Front side of headrest MU ENT SEL MU ENTSEL ADJ RETExit Save / Exit MU Exit Save / Exit SEL SET SEL MU ADJMakes color appear lighter or darker Monitor Remote SEL. MU SET. Exit RET Press Menu button 1 to set the OSD Language Select English Exit Save / Exit Information Source Av1 Format Ntsc HS 15.7 Khz VS 59.8Hz Exit Vcom Adjust Display Model Rotate Specifications Current Consumption 6 W Max Weight 154g