Onkyo HT-R590 Connecting the AV Receiver, Connecting Your Speakers, Connecting the Speaker Cables

Page 11

Connecting the AV Receiver

Connecting Your Speakers

Connecting the Speaker Cables

The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals.

Surround back/

Surround back/

front high

front high

Surround

Surround

right

left

right

left

Center

Front right

Front left

Tip

•You can specify whether surround back or front high speakers are connected in the “Sp Config (Speaker Configuration)” menu (➔ page 36) or during Audyssey 2EQ® Room Correction and Speaker Setup (➔ page 24).

■Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.

■Banana Plugs (excluding Asian models)

1/2" to 5/8" (12 to 15 mm)

•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

•Do not insert the speaker code directly into the center hole of the speaker terminal.

En

11

Image 11

Contents HT-R590 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesTemperature protection operates if the apparatus Attain an abnormal high temperaturePrecautions Aiming the remote controller Supplied AccessoriesMake sure you have the following accessories Installing the batteriesContents Miscellaneous FeaturesAmplifier ProcessingFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Remote Control jackControlling the tuner Remote ControllerControlling the AV Receiver Remote MODE/INPUT Selector buttons 19, 47 toScrew-type speaker terminals Connecting the AV ReceiverConnecting Your Speakers Connecting the Speaker CablesNumber of channels Speaker ConfigurationSpeaker Connection Precautions Using a Powered SubwooferHdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksJack Components Assignable Connecting Components with HdmiAudio return channel ARC function See Recording to make a connection for video recording Connecting Your ComponentsHow to record the video Remote Control Connecting Onkyo uComponentsConnecting a Recording Component System On/Auto Power OnConnecting the Power Cord Connecting AntennaTurning Off See Auto Standby about a power management settingTurning On/Off the AV Receiver Turning OnPlaying the Connected Component Controlling Contents of USB DevicesPlayback Mode Standard Mode controlUnderstanding Icons on the Display Playing iPod/iPhone via USBPlaying USB Device Extended Mode controlUsing the Tuner Tuning into Radio StationsUsing RDS Asian models Presetting AM/FM StationsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Calibration Using Basic FunctionsUsing the Automatic Speaker Setup Measurement procedure` Cancel Set the speaker setup microphone at the MainListening Position a, and connect it to the Setup MIC jack When you’ve finished making the settings, pressChanging the Speaker Setup Manually Error MessagesAbout Listening Modes Using the Listening ModesSelecting Listening Modes Onkyo-Original DSP Listening Modes Following audio formats are supported by the listening modeInput Source Speaker LayoutListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home MenuChanging the Input Display Setting the Display BrightnessUsing the Music Optimizer Displaying Source InformationAV Recording Using HeadphonesMuting the AV Receiver RecordingExplanatory Notes Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuDigital Audio Digital Audio Input Input selector Default assignmentHdmi Input Component Component Video InputCrossover Crossover Frequency Sp Config Speaker ConfigurationFront Surround Back ChLevel Cal Level Calibration Audio AdjustMultiplex/Mono Settings Sp Distance Speaker DistanceTheater-Dimensional Setting Dolby SettingsDTS Setting Audyssey Source SetupAudio Selector Preset Name For Input SelectorSync Hardware Audio TV Out Hdmi SetupHdmi Ctrl Rihd Hdmi ThroughSpeaker Levels Using the Audio SettingsTone Control Settings CinemaFILTER Late Night FunctionMusic Optimizer Controlling Your iPod/iPhone Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Available buttons Controlling Other Onkyo Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling a Blu-ray Disc/DVD Player, HD DVD Player Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsDisc + Components Buttons DVDplayerCassettetape deck There’s no sound, or it’s very quiet TroubleshootingCan’t turn on the AV receiver AV receiver turns off unexpectedlyOnly the front speakers produce sound There’s no sound with a certain signal formatSpeaker volume cannot be set as required About DTS signalsSound changes when I connect my headphones Remote controller doesn’t workCan’t access the music files on a USB device Standby power consumptionVideo Attenuation Video Attoff defaultHow do I change the language of a multiplex source Ufunctions don’t workAudio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats Supported Audio File Formats USB FeaturesUSB Device Requirements About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsTuner Section SpecificationsAmplifier Section Video SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

Related manuals

Manual 60 pages 12.76 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.