Onkyo HT-R590 Turn on the AV receiver and the connected TV, Is connected, ` Save, ` Cancel

Page 25

1

Turn on the AV receiver and the connected TV.

 

On the TV, select the input to which the AV receiver

 

is connected.

2

Set the speaker setup microphone at the Main

Listening Position a, and connect it to the SETUP

MIC jack.

SETUP MIC jack

Speaker setup microphone

The speaker setting menu appears.

Note

•The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

3 When you’ve finished making the settings, press

ENTER.

2EQ: Auto Setup

Audyssey

SurrBk/FrontHigh

 

SurrBack

Perform the “Sp Config (Speaker Configuration)” according to your speaker configuration:

– “SurrBk/FrontHigh” (➔ page 36)

4 Use q/wto select “Audyssey Quick Start” or “Audyssey 2EQ Full Calibration”.

5 Press ENTER.

Audyssey 2EQ® Room Correction and Speaker Setup starts.

Test tones are played through each speaker as Audyssey 2EQ Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone. Do not disconnect the speaker setup microphone during Audyssey 2EQ Room Correction and Speaker Setup, unless you want to cancel the setup.

If you select “Audyssey Quick Start”, you will go to step 8.

6 Place the setup microphone at the next position, and then press ENTER.

Audyssey 2EQ performs more measurements. This takes a few minutes.

7 When prompted, place the setup microphone at the next position, and repeat step 6.

8 Use q/wto select an option, and then press

ENTER.

2EQ: Auto Setup

 

Audyssey

<- Review Speaker Configuration ->

Subwoofer

:

Yes

Front

:

Small

Center

:

Small

Surround

:

Small

Front High

:

None

Surr Back

:

Small

Surr Back Ch

:

2ch

Crossover

:

100Hz

Save

Cancel

The options are:

`Save:

Save the calculated settings and exit

Audyssey 2EQ Room Correction and Speaker

Setup.

`Cancel:

Cancel Audyssey 2EQ Room Correction and

Speaker Setup.

Note

•You can view the calculated settings for the speaker configuration, speaker distances, and speaker levels by using e/r.

9 Use q/wto select a target, and use e/rto change the setting.

After the results of Audyssey 2EQ have been saved, the menu will display the “Audyssey” (➔ page 39), “Dynamic EQ” (➔ page 39), “Dynamic Volume” (➔ page 39) settings.

Note

•When “Audyssey Quick Start” has been used for measurement, “Audyssey” cannot be selected.

•These settings are applied to all input selectors.

10 Press ENTER.

11 Disconnect the speaker setup microphone.

Note

•You can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone.

•Do not connect or disconnect any speakers during Audyssey 2EQ Room Correction and Speaker Setup.

•If the AV receiver is muted, it will be unmuted automatically when Audyssey 2EQ Room Correction and Speaker Setup starts.

•Changes to the room after Audyssey 2EQ Room Correction and Speaker Setup require you run Audyssey 2EQ Room Correction and Speaker Setup again, as room EQ characteristics may have changed.

En

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HT-R590 Temperature protection operates if the apparatus Local regulations when disposing of batteriesAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Make sure you have the following accessories Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Amplifier FeaturesProcessing MiscellaneousFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Remote Control jackControlling the AV Receiver Remote ControllerRemote MODE/INPUT Selector buttons 19, 47 to Controlling the tunerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationUsing a Powered Subwoofer Number of channelsConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Components Assignable How to record the video Connecting Your ComponentsSee Recording to make a connection for video recording Connecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting AntennaTurning On/Off the AV Receiver See Auto Standby about a power management settingTurning On Turning OffPlayback Controlling Contents of USB DevicesPlaying the Connected Component Understanding Icons on the Display Standard Mode controlPlaying iPod/iPhone via USB ModeUsing the Tuner Extended Mode controlTuning into Radio Stations Playing USB DeviceUsing RDS Asian models Presetting AM/FM StationsFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure CalibrationListening Position a, and connect it to the Setup MIC jack Set the speaker setup microphone at the MainWhen you’ve finished making the settings, press ` CancelChanging the Speaker Setup Manually Error MessagesSelecting Listening Modes Using the Listening ModesAbout Listening Modes Input Source Following audio formats are supported by the listening modeSpeaker Layout Onkyo-Original DSP Listening ModesListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home MenuUsing the Music Optimizer Setting the Display BrightnessDisplaying Source Information Changing the Input DisplayMuting the AV Receiver Using HeadphonesRecording AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesHdmi Input Input selector Default assignmentComponent Component Video Input Digital Audio Digital Audio InputFront Sp Config Speaker ConfigurationSurround Back Ch Crossover Crossover FrequencyMultiplex/Mono Settings Audio AdjustSp Distance Speaker Distance Level Cal Level CalibrationDTS Setting Dolby SettingsTheater-Dimensional Setting Audyssey Source SetupSync Preset Name For Input SelectorAudio Selector Hardware Hdmi Ctrl Rihd Hdmi SetupHdmi Through Audio TV OutTone Control Settings Using the Audio SettingsSpeaker Levels Music Optimizer Late Night FunctionCinemaFILTER IPod/iPhone Playback via Onkyo Dock Using the Onkyo DockControlling Your iPod/iPhone Available buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerCassettetape deck Components Buttons DVDplayerDisc + Can’t turn on the AV receiver TroubleshootingAV receiver turns off unexpectedly There’s no sound, or it’s very quietSpeaker volume cannot be set as required There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundCan’t access the music files on a USB device Remote controller doesn’t workStandby power consumption Sound changes when I connect my headphonesHow do I change the language of a multiplex source Video Attoff defaultUfunctions don’t work Video AttenuationVideo Connection Formats Connection Tips and Video Signal PathAudio Connection Formats USB Device Requirements USB FeaturesSupported Audio File Formats Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerAmplifier Section SpecificationsVideo Section Tuner SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH
Related manuals
Manual 60 pages 12.76 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents