Onkyo HT-R590 instruction manual Using the Audio Settings, Tone Control Settings, Speaker Levels

Page 43

■LipSync

`Off

`On

This function allows the AV receiver to automatically correct any delay between the video and the audio, based on the data from the connected monitor.

Note

•This function works only if your HDMI-compatible TV supports HDMI Lip Sync.

After changing the settings of the “HDMI Ctrl (RIHD)”, “HDMI Through” or “Audio Return Ch”, turn off the power to all connected pieces of equipment and then turn them on again. Refer to the instructions for all connected pieces of equipment.

Using the Audio Settings

You can change various audio settings from the Home menu (➔ page 31).

1

Press RECEIVER followed by HOME.

2

Use q/wand ENTER to select “Audio”, and then

 

use q/w/e/rto make the desired selection.

Note

•These settings are not available in either of the following cases:

–a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 42) and an input selector other than HDMI is selected.

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 42) and you’re listening through your TV speakers.

Tone Control Settings

■Bass

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output from the front speakers.

■Treble

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output from the front speakers.

You can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected.

Operating on the AV receiver

1

Press TONE on the AV receiver repeatedly to

 

select either “Bass” or “Treble”.

2

Use + and – on the AV receiver to adjust.

Note

•To bypass the bass and treble tone circuits, select the Direct listening mode.

Speaker Levels

■Subwoofer Level*1

`–15 dB to 0 dB to +12 dB in 1 dB steps

■Center Level

`–12 dB to 0 dB to +12 dB in 1 dB steps

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to “Level Cal (Level Calibration)” (➔ page 37) before setting the AV receiver to Standby.

Note

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ page 36) cannot be adjusted.

*1 This procedure can also be performed on the AV receiver by using its SUBWOOFER LEVEL.

Audyssey

■Audyssey

See “Audyssey” of “Source Setup” (➔ page 39).

■Dynamic EQ

See “Dynamic EQ” of “Source Setup” (➔ page 39).

■Dynamic Volume

See “Dynamic Volume” of “Source Setup” (➔ page 39).

Note

•These technologies can be used when all the following conditions are met:

–Room Correction and Speaker Setup is completed. Note that “Audyssey” requires the “Audyssey 2EQ Full Calibration” method.

–Any listening mode other than Direct is selected.

–A pair of headphones is not connected.

–The input selector other than USB is selected.

•The setting is stored individually for each input selector.

En

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HT-R590 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesTemperature protection operates if the apparatus Attain an abnormal high temperaturePrecautions Aiming the remote controller Supplied AccessoriesMake sure you have the following accessories Installing the batteriesContents Miscellaneous FeaturesAmplifier ProcessingFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Remote Control jackControlling the tuner Remote ControllerControlling the AV Receiver Remote MODE/INPUT Selector buttons 19, 47 toScrew-type speaker terminals Connecting the AV ReceiverConnecting Your Speakers Connecting the Speaker CablesNumber of channels Speaker ConfigurationSpeaker Connection Precautions Using a Powered SubwooferHdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksAudio return channel ARC function Connecting Components with HdmiJack Components Assignable How to record the video Connecting Your ComponentsSee Recording to make a connection for video recording Remote Control Connecting Onkyo uComponentsConnecting a Recording Component System On/Auto Power OnConnecting the Power Cord Connecting AntennaTurning Off See Auto Standby about a power management settingTurning On/Off the AV Receiver Turning OnPlayback Controlling Contents of USB DevicesPlaying the Connected Component Mode Standard Mode controlUnderstanding Icons on the Display Playing iPod/iPhone via USBPlaying USB Device Extended Mode controlUsing the Tuner Tuning into Radio StationsUsing RDS Asian models Presetting AM/FM StationsFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Calibration Using Basic FunctionsUsing the Automatic Speaker Setup Measurement procedure` Cancel Set the speaker setup microphone at the MainListening Position a, and connect it to the Setup MIC jack When you’ve finished making the settings, pressChanging the Speaker Setup Manually Error MessagesSelecting Listening Modes Using the Listening ModesAbout Listening Modes Onkyo-Original DSP Listening Modes Following audio formats are supported by the listening modeInput Source Speaker LayoutListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home MenuChanging the Input Display Setting the Display BrightnessUsing the Music Optimizer Displaying Source InformationAV Recording Using HeadphonesMuting the AV Receiver RecordingExplanatory Notes Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuDigital Audio Digital Audio Input Input selector Default assignmentHdmi Input Component Component Video InputCrossover Crossover Frequency Sp Config Speaker ConfigurationFront Surround Back ChLevel Cal Level Calibration Audio AdjustMultiplex/Mono Settings Sp Distance Speaker DistanceDTS Setting Dolby SettingsTheater-Dimensional Setting Audyssey Source SetupSync Preset Name For Input SelectorAudio Selector Hardware Audio TV Out Hdmi SetupHdmi Ctrl Rihd Hdmi ThroughTone Control Settings Using the Audio SettingsSpeaker Levels Music Optimizer Late Night FunctionCinemaFILTER IPod/iPhone Playback via Onkyo Dock Using the Onkyo DockControlling Your iPod/iPhone Available buttons Controlling Other Onkyo Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling a Blu-ray Disc/DVD Player, HD DVD Player Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsCassettetape deck Components Buttons DVDplayerDisc + There’s no sound, or it’s very quiet TroubleshootingCan’t turn on the AV receiver AV receiver turns off unexpectedlyOnly the front speakers produce sound There’s no sound with a certain signal formatSpeaker volume cannot be set as required About DTS signalsSound changes when I connect my headphones Remote controller doesn’t workCan’t access the music files on a USB device Standby power consumptionVideo Attenuation Video Attoff defaultHow do I change the language of a multiplex source Ufunctions don’t workVideo Connection Formats Connection Tips and Video Signal PathAudio Connection Formats USB Device Requirements USB FeaturesSupported Audio File Formats Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsTuner Section SpecificationsAmplifier Section Video SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH
Related manuals
Manual 60 pages 12.76 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents