Onkyo HT-R590 instruction manual Hardware

Page 41

Setting the Incoming Digital Signal (Fixed Mode)

■Fixed Mode

`Off:

The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead.

`PCM:

Only 2-channel PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will flash and noise may also be produced.

`DTS:

Only DTS (but not DTS-HD) format input signals will be heard. If the input signal is not DTS, the DTS indicator will flash and there will be no sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected in the “Audio Selector” setting, you can then specify the signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS.

•If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM.

•If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS.

Note

•The setting will be reset to “Off” when you change the setting in the “Audio Selector” (➔ page 40).

.

Hardware

Menu

Hardware

OSD Setting

■Volume OSD

`On

`Off

You can select if you wish to display the volume level on- screen, when it is adjusted.

Remote Control Settings

■Remote ID

`1, 2, or 3

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from the other components, you can change its remote ID from “1”, to “2” or “3”.

Note

•If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the remote controller’s ID

1

While holding down RECEIVER, press and hold

 

down SETUP until the remote indicator lights

 

(about 3 seconds) (➔ page 34).

2

Use the number buttons to enter ID 1, 2, or 3.

 

The remote indicator flashes twice.

Tuner

■AM/FM Freq Step (North American and Brazilian models)

`10kHz/200kHz:

`9kHz/50kHz:

Select the frequency step according to your area.

■AM Freq Step (Asian models)

`10kHz:

`9kHz:

Select the frequency step according to your area. For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets will be deleted.

Auto Standby

■Auto Standby

`Off

`On

When “Auto Standby” is set to “On”, AV receiver will automatically perform standby operation if there is no operation for 30 minutes with no audio and no video signal input.

“Auto Standby” will display on the display and OSD from 30 seconds before the Auto Standby functions. Default setting: On (Asian models), Off (North

American and Brazilian models)

Note

•Depending on some sources, the Auto Standby function may activate during playback.

En

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents HT-R590 Temperature protection operates if the apparatus Local regulations when disposing of batteriesAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Make sure you have the following accessories Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Amplifier FeaturesProcessing MiscellaneousFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Remote Control jackControlling the AV Receiver Remote ControllerRemote MODE/INPUT Selector buttons 19, 47 to Controlling the tunerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationUsing a Powered Subwoofer Number of channelsConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Components Assignable Connecting Components with HdmiAudio return channel ARC function See Recording to make a connection for video recording Connecting Your ComponentsHow to record the video Connecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting AntennaTurning On/Off the AV Receiver See Auto Standby about a power management settingTurning On Turning OffPlaying the Connected Component Controlling Contents of USB DevicesPlayback Understanding Icons on the Display Standard Mode controlPlaying iPod/iPhone via USB ModeUsing the Tuner Extended Mode controlTuning into Radio Stations Playing USB DeviceUsing RDS Asian models Presetting AM/FM StationsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure CalibrationListening Position a, and connect it to the Setup MIC jack Set the speaker setup microphone at the MainWhen you’ve finished making the settings, press ` CancelChanging the Speaker Setup Manually Error MessagesAbout Listening Modes Using the Listening ModesSelecting Listening Modes Input Source Following audio formats are supported by the listening modeSpeaker Layout Onkyo-Original DSP Listening ModesListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home MenuUsing the Music Optimizer Setting the Display BrightnessDisplaying Source Information Changing the Input DisplayMuting the AV Receiver Using HeadphonesRecording AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesHdmi Input Input selector Default assignmentComponent Component Video Input Digital Audio Digital Audio InputFront Sp Config Speaker ConfigurationSurround Back Ch Crossover Crossover FrequencyMultiplex/Mono Settings Audio AdjustSp Distance Speaker Distance Level Cal Level CalibrationTheater-Dimensional Setting Dolby SettingsDTS Setting Audyssey Source SetupAudio Selector Preset Name For Input SelectorSync Hardware Hdmi Ctrl Rihd Hdmi SetupHdmi Through Audio TV OutSpeaker Levels Using the Audio SettingsTone Control Settings CinemaFILTER Late Night FunctionMusic Optimizer Controlling Your iPod/iPhone Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Available buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerDisc + Components Buttons DVDplayerCassettetape deck Can’t turn on the AV receiver TroubleshootingAV receiver turns off unexpectedly There’s no sound, or it’s very quietSpeaker volume cannot be set as required There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundCan’t access the music files on a USB device Remote controller doesn’t workStandby power consumption Sound changes when I connect my headphonesHow do I change the language of a multiplex source Video Attoff defaultUfunctions don’t work Video AttenuationAudio Connection Formats Connection Tips and Video Signal PathVideo Connection Formats Supported Audio File Formats USB FeaturesUSB Device Requirements About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerAmplifier Section SpecificationsVideo Section Tuner SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH
Related manuals
Manual 60 pages 12.76 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents