Onkyo HT-R590 Sp Distance Speaker Distance, Level Cal Level Calibration, Audio Adjust

Page 37

Sp Distance (Speaker Distance)

Menu

Sp Distance

This setting is set automatically by Audyssey 2EQ® Room Correction and Speaker Setup (➔ page 24).

Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener’s ears as the sound designer intended.

■Unit

`feet:

Distances can be set in feet. Range: 1ft to 30ft in 1 foot steps.

`meters:

Distances can be set in meters. Range: 0.3m to 9.0m in 0.3 meter steps.

(The default setting varies from country to country.)

■Left, Front High Left, Center, Front High Right, Right, Surround Right, Surr Back Right, Surr Back Left, Surround Left, Subwoofer

`Specify the distance from the each speaker to your listening position.

Note

•These settings are not available in either of the following cases:

–a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 42).

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 42) and you’re listening through your TV speakers.

•Speakers that you set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ page 36) cannot be selected.

Level Cal (Level Calibration)

*1 For the center speaker and subwoofer, the level settings made by using HOME are saved here as the default settings.

Tip

•If you’re using a handheld sound level meter, adjust the level of each speaker so that it reads 75 dB SPL at the listening position, measured with C-weighting and slow reading.

Audio Adjust

Menu

Audio Adjust

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.

Multiplex/Mono Settings

■Multiplex Input Ch (Mux)

`Main

`Sub

`Main/Sub

This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

■Mono

Input Ch (Mono)

`Left + Right

`Left

`Right

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

Menu

Level Cal

This setting is set automatically by Audyssey 2EQ

Room Correction and Speaker Setup (➔ page 24).

Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position.

■Left, Front High Left, Center*1, Front High Right,

Right, Surround Right, Surr Back Right, Surr Back Left, Surround Left

`–12 dB to 0 dB to +12 dB in 1 dB step.

■Subwoofer*1

`–15 dB to 0 dB to +12 dB in 1 dB step.

Note

• These settings cannot be calibrated in either of the following cases:

– a pair of headphones is connected.

– the “Audio TV Out” setting is set to “On” (➔ page 42).

– “HDMI Ctrl (RIHD)” is set to “On” (➔ page 42) and you’re listening through your TV speakers.

– the AV receiver is muted.

• Speakers that you set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ page 36) cannot be selected.

En

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HT-R590 Temperature protection operates if the apparatus Local regulations when disposing of batteriesAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Make sure you have the following accessories Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Amplifier FeaturesProcessing MiscellaneousFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Remote Control jackControlling the AV Receiver Remote ControllerRemote MODE/INPUT Selector buttons 19, 47 to Controlling the tunerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationUsing a Powered Subwoofer Number of channelsConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Components Assignable How to record the video Connecting Your ComponentsSee Recording to make a connection for video recording Connecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting AntennaTurning On/Off the AV Receiver See Auto Standby about a power management settingTurning On Turning OffPlayback Controlling Contents of USB DevicesPlaying the Connected Component Understanding Icons on the Display Standard Mode controlPlaying iPod/iPhone via USB ModeUsing the Tuner Extended Mode controlTuning into Radio Stations Playing USB DeviceUsing RDS Asian models Presetting AM/FM StationsFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure CalibrationListening Position a, and connect it to the Setup MIC jack Set the speaker setup microphone at the MainWhen you’ve finished making the settings, press ` CancelChanging the Speaker Setup Manually Error MessagesSelecting Listening Modes Using the Listening ModesAbout Listening Modes Input Source Following audio formats are supported by the listening modeSpeaker Layout Onkyo-Original DSP Listening ModesListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home MenuUsing the Music Optimizer Setting the Display BrightnessDisplaying Source Information Changing the Input DisplayMuting the AV Receiver Using HeadphonesRecording AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesHdmi Input Input selector Default assignmentComponent Component Video Input Digital Audio Digital Audio InputFront Sp Config Speaker ConfigurationSurround Back Ch Crossover Crossover FrequencyMultiplex/Mono Settings Audio AdjustSp Distance Speaker Distance Level Cal Level CalibrationDTS Setting Dolby SettingsTheater-Dimensional Setting Audyssey Source SetupSync Preset Name For Input SelectorAudio Selector Hardware Hdmi Ctrl Rihd Hdmi SetupHdmi Through Audio TV OutTone Control Settings Using the Audio SettingsSpeaker Levels Music Optimizer Late Night FunctionCinemaFILTER IPod/iPhone Playback via Onkyo Dock Using the Onkyo DockControlling Your iPod/iPhone Available buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerCassettetape deck Components Buttons DVDplayerDisc + Can’t turn on the AV receiver TroubleshootingAV receiver turns off unexpectedly There’s no sound, or it’s very quietSpeaker volume cannot be set as required There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundCan’t access the music files on a USB device Remote controller doesn’t workStandby power consumption Sound changes when I connect my headphonesHow do I change the language of a multiplex source Video Attoff defaultUfunctions don’t work Video AttenuationVideo Connection Formats Connection Tips and Video Signal PathAudio Connection Formats USB Device Requirements USB FeaturesSupported Audio File Formats Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerAmplifier Section SpecificationsVideo Section Tuner SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH
Related manuals
Manual 60 pages 12.76 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents